Back to ndepend

All

NDepend Rules

The best way to get introduced to these rules, is to analyze with NDepend a .NET code base you are working on, and browse these default rules to see what they can tell about the code.

Documentation to learn CQLinq:

Search results Save results for later use

Quality Gates Evolution

Show quality gates evolution between baseline and now.

When a quality gate relies on diff between now and baseline (like New Debt since Baseline) it is not executed against the baseline and as a consequence its evolution is not available.

Double-click a quality gate for editing.

Percentage Coverage

Code coverage is a measure used to describe the degree to which the source code of a program is tested by a particular test suite. A program with high code coverage, measured as a percentage, has had more of its source code executed during testing which suggests it has a lower chance of containing undetected software bugs compared to a program with low code coverage.

Code coverage is certainly the most important quality code metric. But coverage is not enough the team needs to ensure that results are checked at test-time. These checks can be done both in test code, and in application code through assertions. The important part is that a test must fail explicitly when a check gets unvalidated during the test execution.

This quality gate defines a warn threshold (80%) and a fail threshold (70%). These are indicative thresholds and in practice the more the better. To achieve high coverage and low risk, make sure that new and refactored classes gets 100% covered by tests and that the application and test code contains as many checks/assertions as possible.

Percentage Coverage on New Code

New Code is defined as methods added since the baseline.

To achieve high code coverage it is essential that new code gets properly tested and covered by tests. It is advised that all non-UI new classes gets 100% covered.

Typically 90% of a class is easy to cover by tests and 10% is hard to reach through tests. It means that this 10% remaining is not easily testable, which means it is not well designed, which often means that this code is especially error-prone. This is the reason why it is important to reach 100% coverage for a class, to make sure that potentially error-prone code gets tested.

Percentage Coverage on Refactored Code

Refactored Code is defined as methods where code was changed since the baseline.

Comment changes and formatting changes are not considered as refactoring.

To achieve high code coverage it is essential that refactored code gets properly tested and covered by tests. It is advised that when refactoring a class or a method, it is important to also write tests to make sure it gets 100% covered.

Typically 90% of a class is easy to cover by tests and 10% is hard to reach through tests. It means that this 10% remaining is not easily testable, which means it is not well designed, which often means that this code is especially error-prone. This is the reason why it is important to reach 100% coverage for a class, to make sure that potentially error-prone code gets tested.

Blocker Issues

An issue with the severity Blocker cannot move to production, it must be fixed.

The severity of an issue is either defined explicitly in the rule source code, either inferred from the issue annual interest and thresholds defined in the NDepend Project Properties > Issue and Debt.

Critical Issues

An issue with a severity level Critical shouldn't move to production. It still can for business imperative needs purposes, but at worst it must be fixed during the next iterations.

The severity of an issue is either defined explicitly in the rule source code, either inferred from the issue annual interest and thresholds defined in the NDepend Project Properties > Issue and Debt.

New Blocker / Critical / High Issues

An issue with the severity Blocker cannot move to production, it must be fixed.

An issue with a severity level Critical shouldn't move to production. It still can for business imperative needs purposes, but at worth it must be fixed during the next iterations.

An issue with a severity level High should be fixed quickly, but can wait until the next scheduled interval.

The severity of an issue is either defined explicitly in the rule source code, either inferred from the issue annual interest and thresholds defined in the NDepend Project Properties > Issue and Debt.

Critical Rules Violated

The concept of critical rule is useful to pinpoint certain rules that should not be violated.

A rule can be made critical just by checking the Critical button in the rule edition control and then saving the rule.

This quality gate fails if any critical rule gets any violations.

When no baseline is available, rules that rely on diff are not counted. If you observe that this quality gate count slightly decreases with no apparent reason, the reason is certainly that rules that rely on diff are not counted because the baseline is not defined.

Percentage Debt

% Debt total is defined as a percentage on:

• the estimated total effort to develop the code base

• and the the estimated total time to fix all issues (the Debt)

Estimated total effort to develop the code base is inferred from # lines of code of the code base and from the Estimated number of man-day to develop 1000 logical lines of code setting found in NDepend Project Properties > Issue and Debt.

Debt documentation: https://www.ndepend.com/docs/technical-debt#Debt

This quality gates fails if the estimated debt is more than 30% of the estimated effort to develop the code base, and warns if the estimated debt is more than 20% of the estimated effort to develop the code base

Debt

This Quality Gate is disabled per default because the fail and warn thresholds of unacceptable Debt in man-days can only depend on the project size, number of developers and overall context.

However you can refer to the default Quality Gate Percentage Debt.

The Debt is defined as the sum of estimated effort to fix all issues. Debt documentation: https://www.ndepend.com/docs/technical-debt#Debt

New Debt since Baseline

This Quality Gate fails if the estimated effort to fix new or worsened issues (what is called the New Debt since Baseline) is higher than 2 man-days.

This Quality Gate warns if this estimated effort is positive.

Debt documentation: https://www.ndepend.com/docs/technical-debt#Debt

Debt Rating per Namespace

Forbid namespaces with a poor Debt Rating equals to E or D.

The Debt Rating for a code element is estimated by the value of the Debt Ratio and from the various rating thresholds defined in this project Debt Settings.

The Debt Ratio of a code element is a percentage of Debt Amount (in floating man-days) compared to the estimated effort to develop the code element (also in floating man-days).

The estimated effort to develop the code element is inferred from the code elements number of lines of code, and from the project Debt Settings parameters estimated number of man-days to develop 1000 logical lines of code.

The logical lines of code corresponds to the number of debug breakpoints in a method and doesn't depend on code formatting nor comments.

The Quality Gate can be modified to match assemblies, types or methods with a poor Debt Rating, instead of matching namespaces.

Annual Interest

This Quality Gate is disabled per default because the fail and warn thresholds of unacceptable Annual-Interest in man-days can only depend on the project size, number of developers and overall context.

However you can refer to the default Quality Gate New Annual Interest since Baseline.

The Annual-Interest is defined as the sum of estimated annual cost in man-days, to leave all issues unfixed.

Each rule can either provide a formula to compute the Annual-Interest per issue, or assign a Severity level for each issue. Some thresholds defined in Project Properties > Issue and Debt > Annual Interest are used to infer an Annual-Interest value from a Severity level. Annual Interest documentation: https://www.ndepend.com/docs/technical-debt#AnnualInterest

New Annual Interest since Baseline

This Quality Gate fails if the estimated annual cost to leave all issues unfixed, increased from more than 2 man-days since the baseline.

This Quality Gate warns if this estimated annual cost is positive.

This estimated annual cost is named the Annual-Interest.

Each rule can either provide a formula to compute the Annual-Interest per issue, or assign a Severity level for each issue. Some thresholds defined in Project Properties > Issue and Debt > Annual Interest are used to infer an Annual-Interest value from a Severity level. Annual Interest documentation: https://www.ndepend.com/docs/technical-debt#AnnualInterest

Types Hot Spots

This query lists types with most Debt, or in other words, types with issues that would need the largest effort to get fixed.

Both issues on the type and its members are taken account.

Since untested code often generates a lot of Debt, the type size and percentage coverage is shown (just uncomment t.PercentageCoverage in the query source code once you've imported the coverage data).

The Debt Rating and Debt Ratio are also shown for informational purpose.

--

The amount of Debt is not a measure to prioritize the effort to fix issues, it is an estimation of how far the team is from clean code that abides by the rules set.

For each issue the Annual Interest estimates the annual cost to leave the issues unfixed. The Severity of an issue is estimated through thresholds from the Annual Interest.

The Debt Breaking Point represents the duration from now when the estimated cost to leave the issue unfixed costs as much as the estimated effort to fix it.

Hence the shorter the Debt Breaking Point the largest the Return on Investment for fixing the issue. The Breaking Point is the right metric to prioritize issues fix.

Types to Fix Priority

This query lists types per increasing Debt Breaking Point.

For each issue the Debt estimates the effort to fix the issue, and the Annual Interest estimates the annual cost to leave the issue unfixed. The Severity of an issue is estimated through thresholds from the Annual Interest of the issue.

The Debt Breaking Point represents the duration from now when the estimated cost to leave the issue unfixed costs as much as the estimated effort to fix it.

Hence the shorter the Debt Breaking Point the largest the Return on Investment for fixing the issues.

Often new and refactored types since baseline will be listed first, because issues on these types get a higher Annual Interest because it is important to focus first on new issues.

--

Both issues on the type and its members are taken account.

Only types with at least 30 minutes of Debt are listed to avoid polluting the list with the numerous types with small Debt, on which the Breaking Point value makes less sense.

The Annual Interest estimates the cost per year in man-days to leave these issues unfixed.

Since untested code often generates a lot of Debt, the type size and percentage coverage is shown (just uncomment t.PercentageCoverage in the query source code once you've imported the coverage data).

The Debt Rating and Debt Ratio are also shown for informational purpose.

Issues to Fix Priority

This query lists issues per increasing Debt Breaking Point.

Double-click an issue to edit its rule and select the issue in the rule result. This way you can view all information concerning the issue.

For each issue the Debt estimates the effort to fix the issue, and the Annual Interest estimates the annual cost to leave the issue unfixed. The Severity of an issue is estimated through thresholds from the Annual Interest of the issue.

The Debt Breaking Point represents the duration from now when the estimated cost to leave the issue unfixed costs as much as the estimated effort to fix it.

Hence the shorter the Debt Breaking Point the largest the Return on Investment for fixing the issue.

Often issues on new and refactored code elements since baseline will be listed first, because such issues get a higher Annual Interest because it is important to focus first on new issues on recent code.

More documentation: https://www.ndepend.com/docs/technical-debt

Debt and Issues per Rule

This query lists violated rules with most Debt first.

A rule violated has issues. For each issue the Debt estimates the effort to fix the issue.

--

The amount of Debt is not a measure to prioritize the effort to fix issues, it is an estimation of how far the team is from clean code that abides by the rules set.

For each issue the Annual Interest estimates the annual cost to leave the issues unfixed. The Severity of an issue is estimated through thresholds from the Annual Interest.

The Debt Breaking Point represents the duration from now when the estimated cost to leave the issue unfixed costs as much as the estimated effort to fix it.

Hence the shorter the Debt Breaking Point the largest the Return on Investment for fixing the issue. The Breaking Point is the right metric to prioritize issues fix.

--

Notice that rules can be grouped in Rule Category. This way you'll see categories that generate most Debt.

Typically the rules that generate most Debt are the ones related to Code Coverage by Tests, Architecture and Code Smells.

More documentation: https://www.ndepend.com/docs/technical-debt

New Debt and Issues per Rule

This query lists violated rules that have new issues since baseline, with most new Debt first.

A rule violated has issues. For each issue the Debt estimates the effort to fix the issue.

--

New issues since the baseline are consequence of recent code refactoring sessions. They represent good opportunities of fix because the code recently refactored is fresh in the developers mind, which means fixing now costs less than fixing later.

Fixing issues on recently touched code is also a good way to foster practices that will lead to higher code quality and maintainability, including writing unit-tests and avoiding unnecessary complex code.

--

Notice that rules can be grouped in Rule Category. This way you'll see categories that generate most Debt.

Typically the rules that generate most Debt are the ones related to Code Coverage by Tests, Architecture and Code Smells.

More documentation: https://www.ndepend.com/docs/technical-debt

Debt and Issues per Code Element

This query lists code elements that have issues, with most Debt first.

For each code element the Debt estimates the effort to fix the element issues.

The amount of Debt is not a measure to prioritize the effort to fix issues, it is an estimation of how far the team is from clean code that abides by the rules set.

For each element the Annual Interest estimates the annual cost to leave the elements issues unfixed. The Severity of an issue is estimated through thresholds from the Annual Interest of the issue.

The Debt Breaking Point represents the duration from now when the estimated cost to leave the issues unfixed costs as much as the estimated effort to fix it.

Hence the shorter the Debt Breaking Point the largest the Return on Investment for fixing the issue. The Breaking Point is the right metric to prioritize issues fix.

New Debt and Issues per Code Element

This query lists code elements that have new issues since baseline, with most new Debt first.

For each code element the Debt estimates the effort to fix the element issues.

New issues since the baseline are consequence of recent code refactoring sessions. They represent good opportunities of fix because the code recently refactored is fresh in the developers mind, which means fixing now costs less than fixing later.

Fixing issues on recently touched code is also a good way to foster practices that will lead to higher code quality and maintainability, including writing unit-tests and avoiding unnecessary complex code.

Avoid types too big

This rule matches types with more than 200 lines of code. Only lines of code in JustMyCode methods are taken account.

Types where NbLinesOfCode > 200 are extremely complex to develop and maintain. See the definition of the NbLinesOfCode metric here https://www.ndepend.com/docs/code-metrics#NbLinesOfCode

Maybe you are facing the God Class phenomenon: A God Class is a class that controls way too many other classes in the system and has grown beyond all logic to become The Class That Does Everything.

How to Fix:

Types with many lines of code should be split in a group of smaller types.

To refactor a God Class you'll need patience, and you might even need to recreate everything from scratch. Here are a few refactoring advices:

• The logic in the God Class must be split in smaller classes. These smaller classes can eventually become private classes nested in the original God Class, whose instances objects become composed of instances of smaller nested classes.

• Smaller classes partitioning should be driven by the multiple responsibilities handled by the God Class. To identify these responsibilities it often helps to look for subsets of methods strongly coupled with subsets of fields.

• If the God Class contains way more logic than states, a good option can be to define one or several static classes that contains no static field but only pure static methods. A pure static method is a function that computes a result only from inputs parameters, it doesn't read nor assign any static or instance field. The main advantage of pure static methods is that they are easily testable.

• Try to maintain the interface of the God Class at first and delegate calls to the new extracted classes. In the end the God Class should be a pure facade without its own logic. Then you can keep it for convenience or throw it away and start to use the new classes only.

• Unit Tests can help: write tests for each method before extracting it to ensure you don't break functionality.

The estimated Debt, which means the effort to fix such issue, varies linearly from 1 hour for a 200 lines of code type, up to 10 hours for a type with 2.000 or more lines of code.

In Debt and Interest computation, this rule takes account of the fact that static types with no mutable fields are just a collection of static methods that can be easily split and moved from one type to another.

Avoid types with too many methods

This rule matches types with more than 20 methods. Such type might be hard to understand and maintain.

Notice that methods like constructors or property and event accessors are not taken account.

Having many methods for a type might be a symptom of too many responsibilities implemented.

Maybe you are facing the God Class phenomenon: A God Class is a class that controls way too many other classes in the system and has grown beyond all logic to become The Class That Does Everything.

How to Fix:

To refactor properly a God Class please read HowToFix advices from the default rule Types to Big. // The estimated Debt, which means the effort to fix such issue, varies linearly from 1 hour for a type with 20 methods, up to 10 hours for a type with 200 or more methods.

In Debt and Interest computation, this rule takes account of the fact that static types with no mutable fields are just a collection of static methods that can be easily split and moved from one type to another.

Avoid types with too many fields

This rule matches types with more than 15 fields. Such type might be hard to understand and maintain.

Notice that constant fields and static-readonly fields are not counted. Enumerations types are not counted also.

Having many fields for a type might be a symptom of too many responsibilities implemented.

How to Fix:

To refactor such type and increase code quality and maintainability, certainly you'll have to group subsets of fields into smaller types and dispatch the logic implemented into the methods into these smaller types.

More refactoring advices can be found in the default rule Types to Big, HowToFix section.

The estimated Debt, which means the effort to fix such issue, varies linearly from 1 hour for a type with 15 fields, to up to 10 hours for a type with 200 or more fields.

Avoid methods too big, too complex

This rule matches methods where ILNestingDepth > 2 and (NbLinesOfCode > 35 or CyclomaticComplexity > 20 or ILCyclomaticComplexity > 60) Such method is typically hard to understand and maintain.

Maybe you are facing the God Method phenomenon. A "God Method" is a method that does way too many processes in the system and has grown beyond all logic to become The Method That Does Everything. When the need for new processes increases suddenly some programmers realize: why should I create a new method for each process if I can only add an if.

See the definition of the CyclomaticComplexity metric here: https://www.ndepend.com/docs/code-metrics#CC

See the definition of the ILCyclomaticComplexity metric here: https://www.ndepend.com/docs/code-metrics#ILCC

See the definition of the ILNestingDepth metric here: https://www.ndepend.com/docs/code-metrics#ILNestingDepth

How to Fix:

A large and complex method should be split in smaller methods, or even one or several classes can be created for that.

During this process it is important to question the scope of each variable local to the method. This can be an indication if such local variable will become an instance field of the newly created class(es).

Large switch…case structures might be refactored through the help of a set of types that implement a common interface, the interface polymorphism playing the role of the switch cases tests.

Unit Tests can help: write tests for each method before extracting it to ensure you don't break functionality.

The estimated Debt, which means the effort to fix such issue, varies from 40 minutes to 8 hours, linearly from a weighted complexity score.

Avoid methods with too many parameters

This rule matches methods with 7 or more parameters. Such method is painful to call and might degrade performance. See the definition of the NbParameters metric here: https://www.ndepend.com/docs/code-metrics#NbParameters

This rule doesn't match a method that overrides a third-party method with 7 or more parameters because such situation is the consequence of a lower-level problem.

For the same reason, this rule doesn't match a constructor that calls a base constructor with 7 or more parameters.

How to Fix:

More properties/fields can be added to the declaring type to handle numerous states. An alternative is to provide a class or a structure dedicated to handle arguments passing. For example see the class System.Diagnostics.ProcessStartInfo and the method System.Diagnostics.Process.Start(ProcessStartInfo).

The estimated Debt, which means the effort to fix such issue, varies linearly from 1 hour for a method with 7 parameters, up to 6 hours for a methods with 40 or more parameters.

Avoid methods with too many overloads

Method overloading is the ability to create multiple methods of the same name with different implementations, and various set of parameters.

This rule matches sets of methods with 6 overloads or more.

Such method set might be a problem to maintain and provokes coupling higher than necessary.

See the definition of the NbOverloads metric here https://www.ndepend.com/docs/code-metrics#NbOverloads

Notice that this rule doesn't include in the overloads list methods that override a third-party method nor constructors that call a base constructor. Such situations are consequences of lower-level problems.

How to Fix:

Typically the too many overloads phenomenon appears when an algorithm takes a various set of in-parameters. Each overload is presented as a facility to provide a various set of in-parameters. In such situation, the C# and VB.NET language feature named Named and Optional arguments should be used.

The too many overloads phenomenon can also be a consequence of the usage of the visitor design pattern http://en.wikipedia.org/wiki/Visitor_pattern since a method named Visit() must be provided for each sub type. For this reason, the default version of this rule doesn't match overloads whose name start with "visit" or "dispatch" (case-insensitive) to avoid match overload visitors, and you can adapt this rule to your own naming convention.

Sometime too many overloads phenomenon is not the symptom of a problem, for example when a numeric to something conversion method applies to all numeric and nullable numeric types.

The estimated Debt, which means the effort to fix such issue, is of 3 minutes per method overload.

Avoid methods potentially poorly commented

This rule matches methods with less than 10% of comment lines and that have at least 20 lines of code. Such method might need to be more commented.

See the definitions of the Comments metric here: https://www.ndepend.com/docs/code-metrics#PercentageComment https://www.ndepend.com/docs/code-metrics#NbLinesOfComment

Notice that only comments about the method implementation (comments in method body) are taken account.

How to Fix:

Typically add more comment. But code commenting is subject to controversy. While poorly written and designed code would needs a lot of comment to be understood, clean code doesn't need that much comment, especially if variables and methods are properly named and convey enough information. Unit-Test code can also play the role of code commenting.

However, even when writing clean and well-tested code, one will have to write hacks at a point, usually to circumvent some API limitations or bugs. A hack is a non-trivial piece of code, that doesn't make sense at first glance, and that took time and web research to be found. In such situation comments must absolutely be used to express the intention, the need for the hacks and the source where the solution has been found.

The estimated Debt, which means the effort to comment such method, varies linearly from 2 minutes for 10 lines of code not commented, up to 20 minutes for 200 or more, lines of code not commented.

Avoid types with poor cohesion

This rule is based on the LCOM code metric, LCOM stands for Lack Of Cohesion of Methods. See the definition of the LCOM metric here https://www.ndepend.com/docs/code-metrics#LCOM

The LCOM metric measures the fact that most methods are using most fields. A class is considered utterly cohesive (which is good) if all its methods use all its instance fields.

Only types with enough methods and fields are taken account to avoid bias. The LCOM takes its values in the range [0-1].

This rule matches types with LCOM higher than 0.8. Such value generally pinpoints a poorly cohesive class.

How to Fix:

To refactor a poorly cohesive type and increase code quality and maintainability, certainly you'll have to split the type into several smaller and more cohesive types that together, implement the same logic.

For each matched type, you can right-click it then click the menu "Show on the Dependency Graph". This way you can visualize how the fields are used by methods and plan the refactoring based on this information.

The estimated Debt, which means the effort to fix such issue, varies linearly from 5 minutes for a type with a low poorCohesionScore, up to 4 hours for a type with high poorCohesionScore.

Avoid methods with too many local variables

This rule matches methods with more than 15 variables.

Methods where NbVariables > 8 are hard to understand and maintain. Methods where NbVariables > 15 are extremely complex and must be refactored.

The number of variables is inferred from the compiled IL code of the method. The C# and VB.NET compiler might introduce some hidden variables for language constructs like lambdas, so the default threshold of this rule is set to 15 to avoid matching false positives.

How to Fix:

To refactor such method and increase code quality and maintainability, certainly you'll have to split the method into several smaller methods or even create one or several classes to implement the logic.

During this process it is important to question the scope of each variable local to the method. This can be an indication if such local variable will become an instance field of the newly created class(es).

The estimated Debt, which means the effort to fix such issue, varies linearly from 10 minutes for a method with 15 variables, up to 2 hours for a methods with 80 or more variables.

From now, all types added should respect basic quality principles

This rule is executed only if a baseline for comparison is defined (diff mode). This rule operates only on types added since baseline.

This rule can be easily modified to also match types refactored since baseline, that don't satisfy all quality criteria.

Types matched by this rule not only have been recently added or refactored, but also somehow violate one or several basic quality principles, whether it has too many methods, it has too many fields, or is using too many types. Any of these criteria are often a symptom of a type with too many responsibilities.

Notice that to count methods and fields, methods like constructors or property and event accessors are not taken account. Notice that constants fields and static-readonly fields are not counted. Enumerations types are not counted also.

How to Fix:

To refactor such type and increase code quality and maintainability, certainly you'll have to split the type into several smaller types that together, implement the same logic.

Issues of this rule have a constant 10 minutes Debt, because the Debt, which means the effort to fix such issue, is already estimated for issues of rules in the category Code Smells.

However issues of this rule have a High severity, with even more interests for issues on new types since baseline, because the proper time to increase the quality of these types is now, before they get committed in the next production release.

From now, all types added should be 100% covered by tests

This rule is executed only if a baseline for comparison is defined (diff mode). This rule operates only on types added since baseline.

This rule can be easily modified to also match types refactored since baseline, that are not 100% covered by tests.

This rule is executed only if some code coverage data is imported from some code coverage files.

Often covering 10% of remaining uncovered code of a class, requires as much work as covering the first 90%. For this reason, typically teams estimate that 90% coverage is enough. However untestable code usually means poorly written code which usually leads to error prone code. So it might be worth refactoring and making sure to cover the 10% remaining code because most tricky bugs might come from this small portion of hard-to-test code.

Not all classes should be 100% covered by tests (like UI code can be hard to test) but you should make sure that most of the logic of your application is defined in some easy-to-test classes, 100% covered by tests.

In this context, this rule warns when a type added or refactored since the baseline, is not fully covered by tests.

How to Fix:

Write more unit-tests dedicated to cover code not covered yet. If you find some hard-to-test code, it is certainly a sign that this code is not well designed and hence, needs refactoring.

You'll find code impossible to cover by unit-tests, like calls to MessageBox.Show(). An infrastructure must be defined to be able to mock such code at test-time.

Issues of this rule have a constant 10 minutes Debt, because the Debt, which means the effort to write tests for the culprit type, is already estimated for issues in the category Code Coverage.

However issues of this rule have a High severity, with even more interests for issues on new types since baseline, because the proper time to write tests for these types is now, before they get committed in the next production release.

From now, all methods added should respect basic quality principles

This rule is executed only if a baseline for comparison is defined (diff mode). This rule operates only on methods added or refactored since the baseline.

This rule can be easily modified to also match methods refactored since baseline, that don't satisfy all quality criteria.

Methods matched by this rule not only have been recently added or refactored, but also somehow violate one or several basic quality principles, whether it is too large (too many lines of code), too complex (too many if, switch case, loops…) has too many variables, too many parameters or has too many overloads.

How to Fix:

To refactor such method and increase code quality and maintainability, certainly you'll have to split the method into several smaller methods or even create one or several classes to implement the logic.

During this process it is important to question the scope of each variable local to the method. This can be an indication if such local variable will become an instance field of the newly created class(es).

Large switch…case structures might be refactored through the help of a set of types that implement a common interface, the interface polymorphism playing the role of the switch cases tests.

Unit Tests can help: write tests for each method before extracting it to ensure you don't break functionality.

Issues of this rule have a constant 5 minutes Debt, because the Debt, which means the effort to fix such issue, is already estimated for issues of rules in the category Code Smells.

However issues of this rule have a High severity, with even more interests for issues on new methods since baseline, because the proper time to increase the quality of these methods is now, before they get committed in the next production release.

Avoid decreasing code coverage by tests of types

This rule is executed only if a baseline for comparison is defined (diff mode).

This rule is executed only if some code coverage data is imported from some code coverage files.

This rule warns when the number of lines of a type covered by tests decreased since the baseline. In case the type faced some refactoring since the baseline, this loss in coverage is estimated only for types with more lines of code, where # lines of code covered now is lower than # lines of code covered in baseline + the extra number of lines of code.

Such situation can mean that some tests have been removed but more often, this means that the type has been modified, and that changes haven't been covered properly by tests.

To visualize changes in code, right-click a matched type and select:

• Compare older and newer versions of source file

• or Compare older and newer versions decompiled with Reflector

How to Fix:

Write more unit-tests dedicated to cover changes in matched types not covered yet. If you find some hard-to-test code, it is certainly a sign that this code is not well designed and hence, needs refactoring.

The estimated Debt, which means the effort to cover by test code that used to be covered, varies linearly 15 minutes to 3 hours, depending on the number of lines of code that are not covered by tests anymore.

Severity of issues of this rule varies from High to Critical depending on the number of lines of code that are not covered by tests anymore. Because the loss in code coverage happened since the baseline, the severity is high because it is important to focus on these issues now, before such code gets released in production.

Avoid making complex methods even more complex

This rule is executed only if a baseline for comparison is defined (diff mode).

The method complexity is measured through the code metric Cyclomatic Complexity defined here: https://www.ndepend.com/docs/code-metrics#CC

This rule warns when a method already complex (i.e with Cyclomatic Complexity higher than 6) become even more complex since the baseline.

This rule needs assemblies PDB files and source code to be available at analysis time, because the Cyclomatic Complexity is inferred from the source code and source code location is inferred from PDB files. See: https://www.ndepend.com/docs/ndepend-analysis-inputs-explanation

To visualize changes in code, right-click a matched method and select:

• Compare older and newer versions of source file

• or Compare older and newer versions decompiled with Reflector

How to Fix:

A large and complex method should be split in smaller methods, or even one or several classes can be created for that.

During this process it is important to question the scope of each variable local to the method. This can be an indication if such local variable will become an instance field of the newly created class(es).

Large switch…case structures might be refactored through the help of a set of types that implement a common interface, the interface polymorphism playing the role of the switch cases tests.

Unit Tests can help: write tests for each method before extracting it to ensure you don't break functionality.

The estimated Debt, which means the effort to fix such issue, varies linearly from 15 to 60 minutes depending on the extra complexity added.

Issues of this rule have a High severity, because it is important to focus on these issues now, before such code gets released in production.

Avoid making large methods even larger

This rule is executed only if a baseline for comparison is defined (diff mode).

This rule warns when a method already large (i.e with more than 15 lines of code) become even larger since the baseline.

The method size is measured through the code metric # Lines of Code defined here: https://www.ndepend.com/docs/code-metrics#NbLinesOfCode

This rule needs assemblies PDB files to be available at analysis time, because the # Lines of Code is inferred from PDB files. See: https://www.ndepend.com/docs/ndepend-analysis-inputs-explanation

To visualize changes in code, right-click a matched method and select:

• Compare older and newer versions of source file

• or Compare older and newer versions decompiled with Reflector

How to Fix:

Usually too big methods should be split in smaller methods.

But long methods with no branch conditions, that typically initialize some data, are not necessarily a problem to maintain, and might not need refactoring.

The estimated Debt, which means the effort to fix such issue, varies linearly from 5 to 20 minutes depending on the number of lines of code added.

The estimated Debt, which means the effort to fix such issue, varies linearly from 10 to 60 minutes depending on the extra complexity added.

Issues of this rule have a High severity, because it is important to focus on these issues now, before such code gets released in production.

Avoid adding methods to a type that already had many methods

This rule is executed only if a baseline for comparison is defined (diff mode).

Types where number of methods is greater than 15 might be hard to understand and maintain.

This rule lists types that already had more than 15 methods at the baseline time, and for which new methods have been added.

Having many methods for a type might be a symptom of too many responsibilities implemented.

Notice that constructors and methods generated by the compiler are not taken account.

How to Fix:

To refactor such type and increase code quality and maintainability, certainly you'll have to split the type into several smaller types that together, implement the same logic.

The estimated Debt, which means the effort to fix such issue, is equal to 10 minutes per method added.

Issues of this rule have a High severity, because it is important to focus on these issues now, before such code gets released in production.

Avoid adding instance fields to a type that already had many instance fields

This rule is executed only if a baseline for comparison is defined (diff mode).

Types where number of fields is greater than 15 might be hard to understand and maintain.

This rule lists types that already had more than 15 fields at the baseline time, and for which new fields have been added.

Having many fields for a type might be a symptom of too many responsibilities implemented.

Notice that constants fields and static-readonly fields are not taken account. Enumerations types are not taken account also.

How to Fix:

To refactor such type and increase code quality and maintainability, certainly you'll have to group subsets of fields into smaller types and dispatch the logic implemented into the methods into these smaller types.

The estimated Debt, which means the effort to fix such issue, is equal to 10 minutes per field added.

Issues of this rule have a High severity, because it is important to focus on these issues now, before such code gets released in production.

Avoid transforming an immutable type into a mutable one

This rule is executed only if a baseline for comparison is defined (diff mode).

A type is considered as immutable if its instance fields cannot be modified once an instance has been built by a constructor.

Being immutable has several fortunate consequences for a type. For example its instance objects can be used concurrently from several threads without the need to synchronize accesses.

Hence users of such type often rely on the fact that the type is immutable. If an immutable type becomes mutable, there are chances that this will break users code.

This is why this rule warns about such immutable type that become mutable.

The estimated Debt, which means the effort to fix such issue, is equal to 2 minutes per instance field that became mutable.

How to Fix:

If being immutable is an important property for a matched type, then the code must be refactored to preserve immutability.

The estimated Debt, which means the effort to fix such issue, is equal to 10 minutes plus 10 minutes per instance fields of the matched type that is now mutable.

Issues of this rule have a High severity, because it is important to focus on these issues now, before such code gets released in production.

Avoid interfaces too big

This rule matches interfaces with more than 10 methods, properties or events. Interfaces are abstractions and are meant to simplify the code structure. An interface should represent a single responsibility. Making an interface too large, too complex, necessarily means that the interface has too many responsibilities.

A property with a getter or setter or both count as one member. An event count as one member.

How to Fix:

Typically to fix such issue, the interface must be refactored in a grape of smaller single-responsibility interfaces.

A classic example is a ISession large interface, responsible for holding states, run commands and offer various accesses and facilities.

The classic problem for a large public interface is that it has many clients that consume it. As a consequence splitting it in smaller interfaces has an important impact and it is not always feasible.

The estimated Debt, which means the effort to fix such issue, varies linearly from 20 minutes for an interface with 10 methods, up to 7 hours for an interface with 100 or more methods. The Debt is divided by two if the interface is not publicly visible, because in such situation only the current project is impacted by the refactoring.

Base class should not use derivatives

In Object-Oriented Programming, the open/closed principle states: software entities (components, classes, methods, etc.) should be open for extension, but closed for modification. http://en.wikipedia.org/wiki/Open/closed_principle

Hence a base class should be designed properly to make it easy to derive from, this is extension. But creating a new derived class, or modifying an existing one, shouldn't provoke any modification in the base class. And if a base class is using some derivative classes somehow, there are good chances that such modification will be needed.

Extending the base class is not anymore a simple operation, this is not good design.

Note that this rule doesn't warn when a base class is using a derived class that is nested in the base class and declared as private. In such situation we consider that the derived class is an encapsulated implementation detail of the base class.

How to Fix:

Understand the need for using derivatives, then imagine a new design, and then refactor.

Typically an algorithm in the base class needs to access something from derived classes. You can try to encapsulate this access behind an abstract or a virtual method.

If you see in the base class some conditions on typeof(DerivedClass) not only urgent refactoring is needed. Such condition can easily be replaced through an abstract or a virtual method.

Sometime you'll see a base class that creates instance of some derived classes. In such situation, certainly using the factory method pattern http://en.wikipedia.org/wiki/Factory_method_pattern or the abstract factory pattern http://en.wikipedia.org/wiki/Abstract_factory_pattern will improve the design.

The estimated Debt, which means the effort to fix such issue, is equal to 3 minutes per derived class used by the base class + 3 minutes per member of a derived class used by the base class.

Class shouldn't be too deep in inheritance tree

This rule warns about classes having 3 or more base classes. Notice that third-party base classes are not counted because this rule is about your code design, not third-party libraries consumed design.

In theory, there is nothing wrong having a long inheritance chain, if the modeling has been well thought out, if each base class is a well-designed refinement of the domain.

In practice, modeling properly a domain demands a lot of effort and experience and more often than not, a long inheritance chain is a sign of confused design, that will be hard to work with and maintain.

How to Fix:

In Object-Oriented Programming, a well-known motto is Favor Composition over Inheritance.

This is because inheritance comes with pitfalls. In general, the implementation of a derived class is very bound up with the base class implementation. Also a base class exposes implementation details to its derived classes, that's why it's often said that inheritance breaks encapsulation.

On the other hands, Composition favors binding with interfaces over binding with implementations. Hence, not only the encapsulation is preserved, but the design is clearer, because interfaces make it explicit and less coupled.

Hence, to break a long inheritance chain, Composition is often a powerful way to enhance the design of the refactored underlying logic.

You can also read: http://en.wikipedia.org/wiki/Composition_over_inheritance and http://stackoverflow.com/questions/49002/prefer-composition-over-inheritance

The estimated Debt, which means the effort to fix such issue, depends linearly upon the depth of inheritance.

Class with no descendant should be sealed if possible

If a non-static class isn't declared with the keyword sealed, it means that it can be subclassed everywhere the non-sealed class is visible.

Making a class a base class requires significant design effort. Subclassing a non-sealed class, not initially designed to be subclassed, will lead to unanticipated design issue.

Most classes are non-sealed because developers don't care about the keyword sealed, not because the primary intention was to write a class that can be subclassed.

There are performance gain in declaring a class as sealed. See a benchmark here: https://www.meziantou.net/performance-benefits-of-sealed-class.htm

But the real benefit of doing so, is actually to express the intention: this class has not be designed to be a base class, hence it is not allowed to subclass it.

Notice that by default this rule doesn't match public class to avoid matching classes that are intended to be sub-classed by third-party code using your library. If you are developing an application and not a library, just uncomment the clause !t.IsPubliclyVisible.

How to Fix:

For each matched class, take the time to assess if it is really meant to be subclassed. Certainly most matched class will end up being declared as sealed.

Overrides of Method() should call base.Method()

Typically overrides of a base method, should refine or complete the behavior of the base method. If the base method is not called, the base behavior is not refined but it is replaced.

Violations of this rule are a sign of design flaw, especially if the actual design provides valid reasons that advocates that the base behavior must be replaced and not refined.

How to Fix:

You should investigate if inheritance is the right choice to bind the base class implementation with the derived classes implementations. Does presenting the method with polymorphic behavior through an interface, would be a better design choice?

In such situation, often using the design pattern template method http://en.wikipedia.org/wiki/Template_method_pattern might help improving the design.

Do not hide base class methods

Method hiding is when a base class has a non-virtual method M(), and a derived class has also a method M() with the same signature. In such situation, calling base.M() does something different than calling derived.M().

Notice that this is not polymorphic behavior. With polymorphic behavior, calling both base.M() and derived.M() on an instance object of derived, invoke the same implementation.

This situation should be avoided because it obviously leads to confusion. This rule warns about all method hiding cases in the code base.

How to Fix:

To fix a violation of this rule, remove or rename the method, or change the parameter signature so that the method does not hide the base method.

However method hiding is for those times when you need to have two things to have the same name but different behavior. This is a very rare situations, described here: http://blogs.msdn.com/b/ericlippert/archive/2008/05/21/method-hiding-apologia.aspx

A stateless class or structure might be turned into a static type

This rule matches classes and structures that are not static, nor generic, that doesn't have any instance fields, that doesn't implement any interface nor has a base class (different than System.Object).

Such class or structure is a stateless collection of pure functions, that doesn't act on any this object data. Such collection of pure functions is better hosted in a static class. Doing so simplifies the client code that doesn't have to create an object anymore to invoke the pure functions.

How to Fix:

Declare all methods as static and transform the class or structure into a static class.

By default issues of this rule have a Low severity because they reflect more an advice than a problem.

Non-static classes should be instantiated or turned to static

If the constructors of a class are never called, the class is never instantiated, and should be defined as a static class.

However this rule doesn't match instantiation through reflection. As a consequence, plug-in root classes, instantiated through reflection via IoC frameworks, can be false positives for this rule.

This rule doesn't match also classes instantiated by the ASP.NET infrastructure, ASP.NET view model classes and Entity Framework ModelSnapshot, DbContext and Migration classes.

Notice that by default this rule matches also public class. If you are developing a framework with classes that are intended to be instantiated by your clients, just uncomment the line !t.IsPublic.

How to Fix:

First it is important to investigate why the class is never instantiated. If the reason is the class hosts only static methods then the class can be safely declared as static.

Others reasons like, the class is meant to be instantiated via reflection, or is meant to be instantiated only by client code should lead to adapt this rule code to avoid these matches.

Methods should be declared static if possible

When an instance method can be safely declared as static you should declare it as static.

Whenever you write a method, you fulfill a contract in a given scope. The narrower the scope is, the smaller the chance is that you write a bug.

When a method is static, you can't access non-static members; hence, your scope is narrower. So, if you don't need and will never need (even in subclasses) instance fields to fulfill your contract, why give access to these fields to your method? Declaring the method static in this case will let the compiler check that you don't use members that you do not intend to use.

Declaring a method as static if possible is also good practice because clients can tell from the method signature that calling the method can't alter the object's state.

Doing so, is also a micro performance optimization, since a static method is a bit cheaper to invoke than an instance method, because the this reference* doesn't need anymore to be passed.

Notice that if a matched method is a handler, bound to an event through code generated by a designer, declaring it as static might break the designer generated code, if the generated code use the this invocation syntax, (like this.Method()).

How to Fix:

Declare matched methods as static.

Since such method doesn't use any instance fields and methods of its type and base-types, you should consider if it makes sense, to move such a method to a static utility class.

Constructor should not call a virtual method

This rule matches constructors of a non-sealed class that call one or several virtual methods.

When an object written in C# is constructed, what happens is that constructors run in order from the base class to the most derived class.

Also objects do not change type as they are constructed, but start out as the most derived type, with the method table being for the most derived type. This means that virtual method calls always run on the most derived type, even when calls are made from the constructor.

When you combine these two facts you are left with the problem that if you make a virtual method call in a constructor, and it is not the most derived type in its inheritance hierarchy, then it will be called on a class whose constructor has not been run, and therefore may not be in a suitable state to have that method called.

Hence this situation makes the class fragile to derive from.

How to Fix:

Violations reported can be solved by re-designing object initialisation or by declaring the parent class as sealed, if possible.

Avoid the Singleton pattern

The singleton pattern consists in enforcing that a class has just a single instance: http://en.wikipedia.org/wiki/Singleton_pattern At first glance, this pattern looks appealing, it is simple to implement, it addresses a common situation, and as a consequence it is widely used.

However, we discourage you from using singleton classes because experience shows that singleton often results in less testable and less maintainable code. Singleton is by-design, not testable. Each unit test should use their own objects while singleton forces multiple unit-tests to use the same instance object.

Also the singleton static GetInstance() method allows magic access to that single object and its state from wherever developers want! This potentially attractive facility unfortunately ends up into unorganized/messy code that will require effort to be refactored.

Notice that this rule matches only singleton types with mutable instance fields because singleton pitfalls result from anarchical access and modification of instance data.

More details available in these discussions: https://blog.ndepend.com/the-proper-usages-of-the-keyword-static-in-c/ http://adamschepis.com/blog/2011/05/02/im-adam-and-im-a-recovering-singleton-addict/

How to Fix:

This rule matches the classic syntax of singletons, where one static field hold the single instance of the parent class. We underline that the problem is this particular syntax, that plays against testability. The problem is not the fact that a single instance of the class lives at runtime.

Hence to fix matches fo this rule, creates the single instance at the startup of the program, and pass it to all classes and methods that need to access it.

If multiple singletons are identified, they actually form together a program execution context. Such context can be unified in a unique singleton context. Doing so will make it easier to propagate the context across the various program units.

The estimated Debt, which means the effort to fix such issue, is equal to 3 minutes per method relying on the singleton. It is not rare that hundreds of methods rely on the singleton and that it takes hours to get rid of a singleton, refactoring the way just explained above.

The severity of each singleton issue is Critical because as explained, using a the singleton pattern can really prevent the whole program to be testable.

Don't assign static fields from instance methods

Assigning static fields from instance methods leads to poorly maintainable and non-thread-safe code.

More discussion on the topic can be found here: https://blog.ndepend.com/the-proper-usages-of-the-keyword-static-in-c/

How to Fix:

If the static field is just assigned once in the program lifetime, make sure to declare it as readonly and assign it inline, or from the static constructor.

In Object-Oriented-Programming the natural artifact to hold states that can be modified is instance fields.

Hence to fix violations of this rule, make sure to hold assignable states through instance fields, not through static fields.

Avoid empty interfaces

Interfaces define members that provide a behavior or usage contract. The functionality that is described by the interface can be adopted by any type, regardless of where the type appears in the inheritance hierarchy. A type implements an interface by providing implementations for the members of the interface. An empty interface does not define any members. Therefore, it does not define a contract that can be implemented.

If your design includes empty interfaces that types are expected to implement, you are probably using an interface as a marker or a way to identify a group of types. If this identification will occur at run time, the correct way to accomplish this is to use a custom attribute. Use the presence or absence of the attribute, or the properties of the attribute, to identify the target types. If the identification must occur at compile time, then it is acceptable to use an empty interface.

Note that if an interface is empty but implements at least one other interface, it won't be matched by this rule. Such interface can be considered as not empty, since implementing it means that sub-interfaces members must be implemented.

How to Fix:

Remove the interface or add members to it. If the empty interface is being used to label a set of types, replace the interface with a custom attribute.

The estimated Debt, which means the effort to fix such issue, is equal to 10 minutes to discard an empty interface plus 3 minutes per type implementing an empty interface.

Avoid types initialization cycles

The class constructor (also called static constructor, and named cctor in IL code) of a type, if any, is executed by the CLR at runtime, the first time the type is used. A cctor doesn't need to be explicitly declared in C# or VB.NET, to exist in compiled IL code. Having a static field inline initialization is enough to have the cctor implicitly declared in the parent class or structure.

If the cctor of a type t1 is using the type t2 and if the cctor of t2 is using t1, some type initialization unexpected and hard-to-diagnose buggy behavior can occur. Such a cyclic chain of initialization is not necessarily limited to two types and can embrace N types in the general case. More information on types initialization cycles can be found here: http://codeblog.jonskeet.uk/2012/04/07/type-initializer-circular-dependencies/

The present code rule enumerates types initialization cycles. Some false positives can appear if some lambda expressions are defined in cctors or in methods called by cctors. In such situation, this rule considers these lambda expressions as executed at type initialization time, while it is not necessarily the case.

How to Fix:

Types initialization cycles create confusion and unexpected behaviors. If several states hold by several classes must be initialized during the first access of any of those classes, a better design option is to create a dedicated class whose responsibility is to initialize and hold all these states.

The estimated Debt, which means the effort to fix such issue, is equal to 20 minutes per cycle plus 10 minutes per type class constructor involved in the cycle.

Avoid custom delegates

Generic delegates should be preferred over custom delegates. Generic delegates are:

• Action<…> to represent any method with void return type.

• Func<…> to represent any method with a return type. The last generic argument is the return type of the prototyped methods.

• Predicate<T> to represent any method that takes an instance of T and that returns a boolean.

• Expression<…> that represents function definitions that can be compiled and subsequently invoked at runtime but can also be serialized and passed to remote processes.

Thanks to generic delegates, not only the code using these custom delegates will become clearer, but you'll be relieved from the maintenance of these delegate types.

Notice that delegates that are consumed by DllImport extern methods must not be converted, else this could provoke marshalling issues.

How to Fix:

Remove custom delegates and replace them with generic delegates shown in the replaceWith column.

The estimated Debt, which means the effort to fix such issue, is 5 minutes per custom delegates plus 3 minutes per method using such custom delegate.

Types with disposable instance fields must be disposable

This rule warns when a class declares and implements an instance field that whose type implement System.IDisposable or System.IAsyncDisposable and the class does not implement IDisposable.

A class implements the IDisposable interface to dispose of unmanaged resources that it owns. An instance field that is an IDisposable type indicates that the field owns an unmanaged resource. A class that declares an IDisposable field indirectly owns an unmanaged resource and should implement the IDisposable interface. If the class does not directly own any unmanaged resources, it should not implement a finalizer.

This rules might report false positive in case the lifetime of the disposable objects referenced, is longer than the lifetime of the object that hold the disposable references.

How to Fix:

To fix a violation of this rule, implement IDisposable and from the IDisposable.Dispose() method call the Dispose() method of the field(s).

Then for each method calling a constructor of the type, make sure that the Dispose() method is called on all objects created.

The estimated Debt, which means the effort to fix such issue, is 5 minutes per type matched plus 2 minutes per disposable instance field plus 4 minutes per method calling a constructor of the type.

Disposable types with unmanaged resources should declare finalizer

A type that implements System.IDisposable or System.IAsyncDisposable, and has fields that suggest the use of unmanaged resources, does not implement a finalizer as described by Object.Finalize(). A violation of this rule is reported if the disposable type contains fields of the following types:

• System.IntPtr

• System.UIntPtr

• System.Runtime.InteropServices.HandleRef

Notice that this default rule is disabled by default, because it typically reports false positive for classes that just hold some references to managed resources, without the responsibility to dispose them.

To enable this rule just uncomment warnif count > 0.

How to Fix:

To fix a violation of this rule, implement a finalizer that calls your Dispose() method.

Methods that create disposable object(s) and that don't call Dispose()

This code query enumerates methods that create one or several disposable object(s), without calling any Dispose() method.

This code query is not a code rule because it is acceptable to do so, as long as disposable objects are disposed somewhere else.

This code query is designed to be be easily refactored to look after only specific disposable types, or specific caller methods.

You can then refactor this code query to adapt it to your needs and transform it into a code rule.

Classes that are candidate to be turned into structures

Int32, Double, Char or Boolean are structures and not classes. Structures are particularly suited to implement lightweight values. Hence a class is candidate to be turned into a structure when its instances are lightweight values.

This is a matter of performance. It is expected that a program works with plenty of short lived lightweight values. In such situation, the advantage of using struct instead of class, (in other words, the advantage of using values instead of objects), is that values are not managed by the garbage collector. This means that values are cheaper to deal with.

This rule matches classes that looks like being lightweight values. The characterization of such class is:

• It has instance fields.

• All instance fields are typed with value-types (primitive, structure or enumeration)

• It is immutable (the value of its instance fields cannot be modified once the constructor ended).

• It implements no interfaces.

• It has no parameterless constructor.

• It is not generic.

• It has no derived classes.

• It derives directly from System.Object.

• ASP.NETCore ViewModel (its name ends with Model) and Repository

This rule doesn't take account if instances of matched classes are numerous short-lived objects. These criteria are just indications. Only you can decide if it is performance wise to transform a class into a structure.

A related case-study of using class or struct for Tuple<…> generic types can be found here: http://stackoverflow.com/questions/2410710/why-is-the-new-tuple-type-in-net-4-0-a-reference-type-class-and-not-a-value-t

How to Fix:

Just use the keyword struct instead of the keyword class.

CAUTION: Before applying this rule, make sure to understand the deep implications of transforming a class into a structure. http://msdn.microsoft.com/en-us/library/aa664471(v=vs.71).aspx

The estimated Debt, which means the effort to fix such issue, is 5 minutes per class matched plus one minute per method using such class transformed into a structure.

Avoid namespaces with few types

This rule warns about namespaces other than the global namespace that contain less than five types.

Make sure that each of your namespaces has a logical organization and that a valid reason exists to put types in a sparsely populated namespace.

Namespaces should contain types that are used together in most scenarios. When their applications are mutually exclusive, types should be located in separate namespaces. For example, the System.Web.UI namespace contains types that are used in Web applications, and the System.Windows.Forms namespace contains types that are used in Windows-based applications. Even though both namespaces have types that control aspects of the user interface, these types are not designed for use in the same application. Therefore, they are located in separate namespaces.

Careful namespace organization can also be helpful because it increases the discoverability of a feature. By examining the namespace hierarchy, library consumers should be able to locate the types that implement a feature.

Notice that this rule source code contains a list of common infrastructure namespace names that you can complete. Namespaces with ending name component in this list are not matched.

How to Fix:

To fix a violation of this rule, try to combine namespaces that contain just a few types into a single namespace.

Nested types should not be visible

This rule warns about nested types not declared as private.

A nested type is a type declared within the scope of another type. Nested types are useful for encapsulating private implementation details of the containing type. Used for this purpose, nested types should not be externally visible.

Do not use externally visible nested types for logical grouping or to avoid name collisions; instead use namespaces.

Nested types include the notion of member accessibility, which some programmers do not understand clearly.

Nested types declared as protected can be used in subclasses.

How to Fix:

If you do not intend the nested type to be externally visible, change the type's accessibility.

Otherwise, remove the nested type from its parent and make it non-nested.

If the purpose of the nesting is to group some nested types, use a namespace to create the hierarchy instead.

The estimated Debt, which means the effort to fix such issue, is 2 minutes per nested type plus 4 minutes per outter type using such nesting type.

Declare types in namespaces

Types are declared within namespaces to prevent name collisions, and as a way of organizing related types in an object hierarchy.

Types outside any named namespace are in a global namespace that cannot be referenced in code.

The global namespace has no name, hence it is qualified as being the anonymous namespace.

This rule warns about anonymous namespaces.

How to Fix:

To fix a violation of this rule, declare all types of all anonymous namespaces in some named namespaces.

Empty static constructor can be discarded

The class constructor (also called static constructor, and named cctor in IL code) of a type, if any, is executed by the CLR at runtime, just before the first time the type is used.

This rule warns about the declarations of static constructors that don't contain any lines of code. Such cctors are useless and can be safely removed.

How to Fix:

Remove matched empty static constructors.

Instances size shouldn't be too big

Types where SizeOfInst > 128 might degrade performance if many instances are created at runtime. They can also be hard to maintain.

Notice that a class with a large SizeOfInst value doesn't necessarily have a lot of instance fields. It might derive from a class with a large SizeOfInst value.

This query doesn't match types that represent WPF and WindowsForm forms and controls nor Entity Framework special classes.

Some other namespaces like System.ComponentModel or System.Xml have base classes that typically imply large instances size so this rule doesn't match these situations.

This rule doesn't match custom DevExpress component and it is easy to modify this rule ro append other component vendors to avoid false positives.

See the definition of the SizeOfInst metric here https://www.ndepend.com/docs/code-metrics#SizeOfInst

How to Fix:

A type with a large SizeOfInst value hold directly a lot of data. Typically, you can group this data into smaller types that can then be composed.

The estimated Debt, which means the effort to fix such issue, varies linearly from severity Medium for 128 bytes per instance to twice interests for severity High for 2048 bytes per instance.

The estimated annual interest of issues of this rule is 10 times higher for structures, because large structures have a significant performance cost. Indeed, each time such structure value is passed as a method parameter it gets copied to a new local variable (note that the word value is more appropriate than the word instance for structures). For this reason, such structure should be declared as class.

Attribute classes should be sealed

The .NET Framework class library provides methods for retrieving custom attributes. By default, these methods search the attribute inheritance hierarchy; for example System.Attribute.GetCustomAttribute() searches for the specified attribute type, or any attribute type that extends the specified attribute type.

Sealing the attribute eliminates the search through the inheritance hierarchy, and can improve performance.

How to Fix:

To fix a violation of this rule, seal the attribute type or make it abstract.

Don't use obsolete types, methods or fields

The attribute System.ObsoleteAttribute is used to tag types, methods, fields, properties or events of an API that clients shouldn't use because these code elements will be removed sooner or later.

This rule warns about methods that use a type, a method or a field, tagged with System.ObsoleteAttribute.

How to Fix:

Typically when a code element is tagged with System.ObsoleteAttribute, a workaround message is provided to clients.

This workaround message will tell you what to do to avoid using the obsolete code element.

The estimated Debt, which means the effort to fix such issue, is 5 minutes per type, method or field used.

Issues of this rule have a severity High because it is important to not rely anymore on obsolete code.

Do implement methods that throw NotImplementedException

The exception NotImplementedException is used to declare a method stub that can be invoked, and defer the development of the method implementation.

This exception is especially useful when doing TDD (Test Driven Development) when tests are written first. This way tests fail until the implementation is written.

Hence using NotImplementedException is a temporary facility, and before releasing, will come a time when this exception shouldn't be used anywhere in code.

NotImplementedException should not be used permanently to mean something like this method should be overriden or this implementation doesn't support this facility. Artefact like abstract method or abstract class should be used instead, to favor a compile time error over a run-time error.

This rule warns about method still using NotImplementedException.

How to Fix:

Investigate why NotImplementedException is still thrown.

Such issue has a High severity if the method code consists only in throwing NotImplementedException. Such situation means either that the method should be implemented, either that what should be a compile time error is a run-time error by-design, and this is not good design. Sometime this situation also pinpoints a method stub that can be safely removed.

If NotImplementedException is thrown from a method with significant logic, the severity is considered as Medium, because often the fix consists in throwing another exception type, like InvalidOperationException.

Override equals and operator equals on value types

For value types, the inherited implementation of Equals() uses the Reflection library, and compares the contents of all instances fields. Reflection is computationally expensive, and comparing every field for equality might be unnecessary.

If you expect users to compare or sort instances, or use them as hash table keys, your value type should implement Equals(). In C# and VB.NET, you should also provide an implementation of GetHashCode() and of the equality and inequality operators.

How to Fix:

To fix a violation of this rule, provide an implementation of Equals() and GetHashCode() and implement the equality and inequality operators.

The estimated Debt, which means the effort to fix such issue, is equal to 15 minutes plus 2 minutes per instance field.

Boxing/unboxing should be avoided

Boxing is the process of converting a value type to the type object or to any interface type implemented by this value type. When the CLR boxes a value type, it wraps the value inside a System.Object and stores it on the managed heap.

Unboxing extracts the value type from the object. Boxing is implicit; unboxing is explicit.

The concept of boxing and unboxing underlies the C# unified view of the type system in which a value of any type can be treated as an object. More about boxing and unboxing here: https://msdn.microsoft.com/en-us/library/yz2be5wk.aspx

This rule has been disabled by default to avoid noise in issues found by the NDepend default rule set. If boxing/unboxing is important to your team, just re-activate this rule.

How to Fix:

Thanks to .NET generic, and especially thanks to generic collections, boxing and unboxing should be rarely used. Hence in most situations the code can be refactored to avoid relying on boxing and unboxing. See for example: http://stackoverflow.com/questions/4403055/boxing-unboxing-and-generics

With a performance profiler, indentify methods that consume a lot of CPU time. If such method uses boxing or unboxing, especially in a loop, make sure to refactor it.

By default issues of this rule have a Low severity because they reflect more an advice than a problem.

Avoid namespaces mutually dependent

This rule lists types and methods from a low-level namespace that use types and methods from higher-level namespace.

The pair of low and high level namespaces is made of two namespaces that use each other.

For each pair of namespaces, to infer which one is low-level and which one is high-level, the rule computes the two coupling [from A to B] and [from B to A] in terms of number of types, methods and fields involved in the coupling. Typically the coupling from low-level to high-level namespace is significantly lower than the other legitimate coupling.

Following this rule is useful to avoid namespaces dependency cycles. This will get the code architecture close to a layered architecture, where low-level code is not allowed to use high-level code.

In other words, abiding by this rule will help significantly getting rid of what is often called spaghetti code: Entangled code that is not properly layered and structured.

More on this in our white books relative to partitioning code. https://www.ndepend.com/docs/white-books

How to Fix:

Refactor the code to make sure that the low-level namespace doesn't use the high-level namespace.

The rule lists in detail which low-level types and methods shouldn't use which high-level types and methods. The refactoring patterns that help getting rid of each listed dependency include:

• Moving one or several types from the low-level namespaces to the high-level one, or do the opposite.

• Use Inversion of Control (IoC): http://en.wikipedia.org/wiki/Inversion_of_control This consists in creating new interfaces in the low-level namespace, implemented by classes in the high-level namespace. This way low-level code can consume high-level code through interfaces, without using directly high-level implementations. Interfaces can be passed to low-level code through the high-level namespace code, or through even higher-level code. In related documentations you can see these interfaces named as callbacks, and the overall pattern is also known as Dependency Injection (DI): http://en.wikipedia.org/wiki/Dependency_injection

That rule might not be applicable for frameworks that present public namespaces mutually dependent. In such situation the cost to break the API can be higher than the cost to let the code entangled.

-

The estimated Debt, which means the effort to fix such issue to make sure that the first namespace doesn't rely anymore on the second one, depends on the number of types and methods used.

Because both namespace are now forming a super-component that cannot be partitioned in smaller components, the cost to unfix each issue is proportional to the size of this super-component. As a consequence, the estimated Annual Interest, which means the annual cost to let both namespaces mutually dependend, is equal to an hour plus a number of minutes proportional to the size (in lines of code) of both namespaces. The obtained Annual Interest value is then divided by the number of detailled issues listed.

Often the estimated Annual Interest for each listed issue is higher than the Debt, which means that leaving such issue unfixed for a year costs more than taking the time to fix issue once.

--

To explore the coupling between the two namespaces mutually dependent:

1) from the becauseNamespace right-click menu choose Copy to Matrix Columns to export this low-level namespace to the horizontal header of the dependency matrix.

2) from the shouldntUseNamespace right-click menu choose Copy to Matrix Rows to export this high-level namespace to the vertical header of the dependency matrix.

3) double-click the black matrix cell (it is black because of the mutual dependency).

4) in the matrix command bar, click the button: Remove empty Row(s) and Column(s).

At this point, the dependency matrix shows types involved into the coupling.

• Blue cells represent types from low-level namespace using types from high-level namespace

• Green cells represent types from high-level namespace using types from low-level namespace

• Black cells represent types from low-level and high-level namespaces that use each other.

There are more green cells than blue and black cells because green cell represents correct coupling from high-level to low-level. The goal is to eliminate incorrect dependencies represented by blue and black cells.

Avoid namespaces dependency cycles

This rule lists all application namespace dependency cycles. Each row shows a different cycle, indexed with one of the namespace entangled in the cycle.

Read our white books relative to partitioning code, to know more about namespaces dependency cycles, and why avoiding them is a simple yet efficient solution to clean the architecture of a code base. https://www.ndepend.com/docs/white-books

How to Fix:

Removing first pairs of mutually dependent namespaces will eliminate most namespaces dependency cycles. This is why it is recommended to focus first on matches of the default rule Avoid namespaces mutually dependent before attempting to fix issues of the present rule.

Once all mutually dependent namespaces occurrences are solved, remaining cycles matched by the present rule necessarily involve 3 or more namespaces like in: A is using B is using C is using A.

To browse a cycle on the dependency graph or the dependency matrix, right click a cycle cell in the result of the present rule and export the matched namespaces to the dependency graph or matrix. This is illustrated here: https://www.ndepend.com/docs/visual-studio-dependency-graph#Entangled

With such a cycle graph visualized, you can determine which dependencies should be discarded to break the cycle. To do so, you need to identify which namespace should be at low-level and which one should be at high-level.

In the A is using B is using C is using A cycle example, if A should be at low level then C should be at a higher-level than A. As a consequence C shouldn't use A and this dependency should be removed. To remove a dependency you can refer to patterns described in the HowToFix section of the rule Avoid namespaces mutually dependent.

Notice that the dependency matrix can also help visualizing and breaking cycles. In the matrix cycles are represented with red squares and black cells. To easily browse dependency cycles, the dependency matrix comes with an option: Display Direct and Indirect Dependencies. See related documentation here: https://www.ndepend.com/docs/dependency-structure-matrix-dsm#Cycle https://www.ndepend.com/docs/dependency-structure-matrix-dsm#Mutual

The estimated Debt, which means the effort to fix such issue, doesn't depend on the cycle length. First because fixing the rule Avoid namespaces mutually dependent will fix most cycle reported here, second because even a long cycle can be broken by removing a single or a few dependencies.

Avoid partitioning the code base through many small library Assemblies

Each .NET Assembly compiled represents one or several physical file(s). Having too many library .NET Assemblies is a symptom of considering physical .NET Assemblies as logical components.

We advise having less, and bigger, .NET Assemblies and using the concept of namespaces to define logical components. Benefits are:

• Faster compilation time.

• Faster startup time for your program.

• Easier deployment thanks to less files to manage.

• If you are developing a Framework, less .NET assemblies to reference and manage for your clients.

How to Fix:

Consider using the physical concept of assemblies for physical needs only.

Our white book about Partitioning code base through .NET assemblies and Visual Studio projects explains in details valid and invalid reasons to use assemblies. Download it here: https://www.ndepend.com/Res/NDependWhiteBook_Assembly.pdf

UI layer shouldn't use directly DB types

This rule is more a sample rule to adapt to your need, than a rigid rule you should abide by. It shows how to define code layers in a rule and how to be warned about layers dependencies violations.

This rule first defines the UI layer and the DB framework layer. Second it checks if any UI layer type is using directly any DB framework layer type.

• The DB framework layer is defined as the set of third-party types in the framework ADO.NET, EntityFramework, NHibernate types, that the application is consuming. It is easy to append and suppress any DB framework.

• The UI layer (User Interface Layer) is defined as the set of types that use WPF, Windows Form, ASP.NET.

UI using directly DB frameworks is generally considered as poor design because DB frameworks accesses should be a concept hidden to UI, encapsulated into a dedicated Data Access Layer (DAL).

Notice that per defaut this rule estimates a technical debt proportional to the coupling between the UI and DB types.

How to Fix:

This rule lists precisely which UI type uses which DB framework type. Instead of fixing matches one by one, first imagine how DB framework accesses could be encapsulated into a dedicated layer.

UI layer shouldn't use directly DAL layer

This rule is more a sample rule to adapt to your need, than a rigid rule you should abide by. It shows how to define code layers in a rule and how to be warned about layers dependencies violations.

This rule first defines the UI layer and the DAL layer. Second it checks if any UI layer type is using directly any DAL layer type.

• The DB layer (the DAL, Data Access Layer) is defined as the set of types of the application that use ADO.NET, EntityFramework, NHibernate types. It is easy to append and suppress any DB framework.

• The UI layer (User Interface Layer) is defined as the set of types that use WPF, Windows Form, ASP.NET.

UI using directly DAL is generally considered as poor design because DAL accesses should be a concept hidden to UI, encapsulated into an intermediary domain logic.

Notice that per defaut this rule estimates a technical debt proportional to the coupling between the UI with the DAL layer.

How to Fix:

This rule lists precisely which UI type uses which DAL type.

More about this particular design topic here: http://www.kenneth-truyers.net/2013/05/12/the-n-layer-myth-and-basic-dependency-injection/

Assemblies with poor cohesion (RelationalCohesion)

This rule computes the Relational Cohesion metric for the application assemblies, and warns about wrong values.

The Relational Cohesion for an assembly, is the total number of relationship between types of the assemblies, divided by the number of types. In other words it is the average number of types in the assembly used by a type in the assembly.

As classes inside an assembly should be strongly related, the cohesion should be high. On the other hand, a value which is too high may indicate over-coupling. A good range for Relational Cohesion is 1.5 to 4.0.

Notice that assemblies with less than 20 types are ignored.

How to Fix:

Matches of this present rule might reveal either assemblies with specific coding constraints (like code generated that have particular structure) either issues in design.

In the second case, large refactoring can be planned not to respect this rule in particular, but to increase the overall design and code maintainability.

The severity of issues of this rule is Low because the code metric Relational Cohesion is an information about the code structure state but is not actionable, it doesn't tell precisely what to do obtain a better score.

Fixing actionable issues of others Architecture and Code Smells default rules will necessarily increase the Relational Cohesion scores.

Namespaces with poor cohesion (RelationalCohesion)

This rule computes the Relational Cohesion metric for the application namespaces, and warns about wrong values.

The Relational Cohesion for a namespace, is the total number of relationship between types of the namespaces, divided by the number of types. In other words it is the average number of types in the namespace used by a type in the namespace.

As classes inside a namespace should be strongly related, the cohesion should be high. On the other hand, a value which is too high may indicate over-coupling. A good range for Relational Cohesion is 1.5 to 4.0.

Notice that namespaces with less than 20 types are ignored.

How to Fix:

Matches of this present rule might reveal either namespaces with specific coding constraints (like code generated that have particular structure) either issues in design.

In the second case, refactoring sessions can be planned to increase the overall design and code maintainability.

You can get an overview of class coupling for a matched namespace by exporting the ChildTypes to the graph. (Right click the ChildTypes cells)

The severity of issues of this rule is Low because the code metric Relational Cohesion is an information about the code structure state but is not actionable, it doesn't tell precisely what to do obtain a better score.

Fixing actionable issues of others Architecture and Code Smells default rules will necessarily increase the Relational Cohesion scores.

Assemblies that don't satisfy the Abstractness/Instability principle

The Abstractness versus Instability Diagram that is shown in the NDepend report helps to assess which assemblies are potentially painful to maintain (i.e concrete and stable) and which assemblies are potentially useless (i.e abstract and instable).

• Abstractness: If an assembly contains many abstract types (i.e interfaces and abstract classes) and few concrete types, it is considered as abstract.

• Stability: An assembly is considered stable if its types are used by a lot of types from other assemblies. In this context stable means painful to modify.

From these metrics, we define the perpendicular normalized distance of an assembly from the idealized line A + I = 1 (called main sequence). This metric is an indicator of the assembly's balance between abstractness and stability. We precise that the word normalized means that the range of values is [0.0 … 1.0].

This rule warns about assemblies with a normalized distance greater than than 0.7.

This rules use the default code metric on assembly Normalized Distance from the Main Sequence explained here: https://www.ndepend.com/docs/code-metrics#DitFromMainSeq

These concepts have been originally introduced by Robert C. Martin in 1994 in this paper: http://www.objectmentor.com/resources/articles/oodmetrc.pdf

How to Fix:

Violations of this rule indicate assemblies with an improper abstractness / stability balance.

• Either the assembly is potentially painful to maintain (i.e is massively used and contains mostly concrete types). This can be fixed by creating abstractions to avoid too high coupling with concrete implementations.

• Either the assembly is potentially useless (i.e contains mostly abstractions and is not used enough). In such situation, the design must be reviewed to see if it can be enhanced.

The severity of issues of this rule is Low because the Abstractness/Instability principle is an information about the code structure state but is not actionable, it doesn't tell precisely what to do obtain a better score.

Fixing actionable issues of others Architecture and Code Smells default rules will necessarily push the Abstractness/Instability principle scores in the right direction.

Higher cohesion - lower coupling

It is deemed as a good software architecture practice to clearly separate abstract namespaces that contain only abstractions (interfaces, enumerations, delegates) from concrete namespaces, that contain classes and structures.

Typically, the more concrete namespaces rely on abstract namespaces only, the more Decoupled is the architecture, and the more Cohesive are classes inside concrete namespaces.

The present code query defines sets of abstract and concrete namespaces and show for each concrete namespaces, which concrete and abstract namespaces are used.

How to Fix:

This query can be transformed into a code rule, depending if you wish to constraint your code structure coupling / cohesion ratio.

Avoid mutually-dependent types

This rule matches pairs of classes or structures that use each others.

In this situation both types are not isolated: each type cannot be reviewed, refactored or tested without the other one.

This rule is disabled by default because there are some common situations, like when implementing recursive data structures, complex serialization or using the visitor pattern, where having mutually dependent types is legitimate. Just enable this rule if you wish to fix most of its issues.

How to Fix:

Fixing mutually-dependent types means identifying the unwanted dependency (t1 using t2, or t2 using t1) and then removing this dependency.

Often you'll have to use the dependency inversion principle by creating one or several interfaces dedicated to abstract one implementation from the other one: https://en.wikipedia.org/wiki/Dependency_inversion_principle

Example of custom rule to check for dependency

This rule is a sample rule that shows how to check if a particular dependency exists or not, from a code element A to a code element B, A and B being an Assembly, a Namespace, a Type, a Method or a Field, A and B being not necessarily of same kind (i.e two Assemblies or two Namespaces…).

Such rule can be generated:

• by right clicking the cell in the Dependency Matrix with B in row and A in column,

• or by right-clicking the concerned arrow in the Dependency Graph from A to B,

and in both cases, click the menu Generate a code rule that warns if this dependency exists

The generated rule will look like this one. It is now up to you to adapt this rule to check exactly your needs.

How to Fix:

This is a sample rule there is nothing to fix as is.

API Breaking Changes: Types

This rule is executed only if a baseline for comparison is defined (diff mode).

This rule warns if a type publicly visible in the baseline, is not publicly visible anymore or if it has been removed. Clients code using such type will be broken.

How to Fix:

Make sure that public types that used to be presented to clients, still remain public now, and in the future.

If a public type must really be removed, you can tag it with System.ObsoleteAttribute with a workaround message during a few public releases, until it gets removed definitely. Notice that this rule doesn't match types removed that were tagged as obsolete.

Issues of this rule have a severity equal to High because an API Breaking change can provoque significant friction with consumers of the API.

API Breaking Changes: Methods

This rule is executed only if a baseline for comparison is defined (diff mode).

This rule warns if a method publicly visible in the baseline, is not publicly visible anymore or if it has been removed. Clients code using such method will be broken.

How to Fix:

Make sure that public methods that used to be presented to clients, still remain public now, and in the future.

If a public method must really be removed, you can tag it with System.ObsoleteAttribute with a workaround message during a few public releases, until it gets removed definitely. Notice that this rule doesn't match methods removed that were tagged as obsolete.

Issues of this rule have a severity equal to High because an API Breaking change can provoque significant friction with consumers of the API.

API Breaking Changes: Fields

This rule is executed only if a baseline for comparison is defined (diff mode).

This rule warns if a field publicly visible in the baseline, is not publicly visible anymore or if it has been removed. Clients code using such field will be broken.

How to Fix:

Make sure that public fields that used to be presented to clients, still remain public now, and in the future.

If a public field must really be removed, you can tag it with System.ObsoleteAttribute with a workaround message during a few public releases, until it gets removed definitely. Notice that this rule doesn't match fields removed that were tagged as obsolete.

Issues of this rule have a severity equal to High because an API Breaking change can provoque significant friction with consumers of the API.

API Breaking Changes: Interfaces and Abstract Classes

This rule is executed only if a baseline for comparison is defined (diff mode).

This rule warns if a publicly visible interface or abstract class has been changed and contains new abstract methods or if some abstract methods have been removed.

Clients code that implement such interface or derive from such abstract class will be broken.

How to Fix:

Make sure that the public contracts of interfaces and abstract classes that used to be presented to clients, remain stable now, and in the future.

If a public contract must really be changed, you can tag abstract methods that will be removed with System.ObsoleteAttribute with a workaround message during a few public releases, until it gets removed definitely.

Issues of this rule have a severity equal to High because an API Breaking change can provoque significant friction with consummers of the API. The severity is not set to Critical because an interface is not necessarily meant to be implemented by the consummer of the API.

Broken serializable types

This rule is executed only if a baseline for comparison is defined (diff mode).

This rule warns about breaking changes in types tagged with SerializableAttribute.

To do so, this rule searches for serializable type with serializable instance fields added or removed. Notice that it doesn't take account of fields tagged with NonSerializedAttribute.

From http://msdn.microsoft.com/library/system.serializableattribute.aspx : "All the public and private fields in a type that are marked by the SerializableAttribute are serialized by default, unless the type implements the ISerializable interface to override the serialization process. The default serialization process excludes fields that are marked with the NonSerializedAttribute attribute."

How to Fix:

Make sure that the serialization process of serializable types remains stable now, and in the future.

Else you'll have to deal with Version Tolerant Serialization that is explained here: https://msdn.microsoft.com/en-us/library/ms229752(v=vs.110).aspx

Issues of this rule have a severity equal to High because an API Breaking change can provoque significant friction with consummers of the API.

Avoid changing enumerations Flags status

This rule is executed only if a baseline for comparison is defined (diff mode).

This rule matches enumeration types that used to be tagged with FlagsAttribute in the baseline, and not anymore. It also matches the opposite, enumeration types that are now tagged with FlagsAttribute, and were not tagged in the baseline.

Being tagged with FlagsAttribute is a strong property for an enumeration. Not so much in terms of behavior (only the enum.ToString() method behavior changes when an enumeration is tagged with FlagsAttribute) but in terms of meaning: is the enumeration a range of values or a range of flags?

As a consequence, changing the FlagsAttributes status of an enumeration can have significant impact for its clients.

How to Fix:

Make sure the FlagsAttribute status of each enumeration remains stable now, and in the future.

API: New publicly visible types

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists types that are new in the public surface of the analyzed assemblies.

API: New publicly visible methods

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists methods that are new in the public surface of the analyzed assemblies.

API: New publicly visible fields

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists fields that are new in the public surface of the analyzed assemblies.

Code should be tested

This rule lists methods not covered at all by test or partially covered by tests.

For each match, the rules estimates the technical debt, i.e the effort to write unit and integration tests for the method. The estimation is based on the effort to develop the code element multiplied by factors in the range ]0,1.3] based on

• the method code size and complexity

• the actual percentage coverage

• the abstractness of types used, because relying on classes instead of interfaces makes the code more difficult to test

• the method visibility because testing private or protected methods is more difficult than testing public and internal ones

• the fields used by the method, because is is more complicated to write tests for methods that read mutable static fields whose changing state is shared across tests executions.

• whether the method is considered JustMyCode or not because NotMyCode is often generated easier to get tested since tests can be generated as well.

This rule is necessarily a large source of technical debt, since the code left untested is by definition part of the technical debt.

This rule also estimates the annual interest, i.e the annual cost to let the code uncovered, based on the effort to develop the code element, multiplied by factors based on usage of the code element.

How to Fix:

Write unit tests to test and cover the methods and their parent classes matched by this rule.

New Methods should be tested

This rule is executed only if a baseline for comparison is defined (diff mode). This rule operates only on methods added or refactored since the baseline.

This rule is executed only if some code coverage data is imported from some code coverage files.

It is important to write code mostly covered by tests to achieve maintainable and non-error-prone code.

In real-world, many code bases are poorly covered by tests. However it is not practicable to stop the development for months to refactor and write tests to achieve high code coverage ratio.

Hence it is recommended that each time a method (or a type) gets added, the developer takes the time to write associated unit-tests to cover it.

Doing so will help to increase significantly the maintainability of the code base. You'll notice that quickly, refactoring will also be driven by testability, and as a consequence, the overall code structure and design will increase as well.

Issues of this rule have a High severity because they reflect an actual trend to not care about writing tests on refactored code.

How to Fix:

Write unit-tests to cover the code of most methods and classes added.

Methods refactored should be tested

This rule is executed only if a baseline for comparison is defined (diff mode). This rule operates only on methods added or refactored since the baseline.

This rule is executed only if some code coverage data is imported from some code coverage files.

It is important to write code mostly covered by tests to achieve maintainable and non-error-prone code.

In real-world, many code bases are poorly covered by tests. However it is not practicable to stop the development for months to refactor and write tests to achieve high code coverage ratio.

Hence it is recommended that each time a method (or a type) gets refactored, the developer takes the time to write associated unit-tests to cover it.

Doing so will help to increase significantly the maintainability of the code base. You'll notice that quickly, refactoring will also be driven by testability, and as a consequence, the overall code structure and design will increase as well.

Issues of this rule have a High severity because they reflect an actual trend to not care about writing tests on refactored code.

How to Fix:

Write unit-tests to cover the code of most methods and classes refactored.

Assemblies Namespaces and Types should be tested

This rule lists assemblies, namespaces and types that are not covered at all by unit tests.

If a parent is matched its children are not matched. For example if a namespace is matched, its child types are not matched.

This rule goal is not to collide with the Code should be tested rule that lists uncovered code for each method and infer the effort to write unit tests (the Debt) and the annual cost to let the code untested (the Annual Interest).

This rule goal is to inform of large code elements left untested. As a consequence the Debt per issue is only 4 minutes and the severity of the issues is Low.

How to Fix:

Write unit and integration tests to cover, even partially, code elements matched by this rule.

Then use issues of the rules Code should be tested, New Methods should be tested and Methods refactored should be tested to write more tests where it matters most, and eventually refactor some code to make it more testable.

Types almost 100% tested should be 100% tested

This rule is executed only if some code coverage data is imported from some code coverage files.

Often covering the few percents of remaining uncovered code of a class, requires as much work as covering the first 90%. For this reason, often teams estimate that 90% coverage is enough. However untestable code usually means poorly written code which usually leads to error prone code. So it might be worth refactoring and making sure to cover the few uncovered lines of code because most tricky bugs might come from this small portion of hard-to-test code.

Not all classes should be 100% covered by tests (like UI code can be hard to test) but you should make sure that most of the logic of your application is defined in some easy-to-test classes, 100% covered by tests.

Issues of this rule have a High severity because as explained, such situation is bug-prone.

How to Fix:

Write more unit-tests dedicated to cover code not covered yet. If you find some hard-to-test code, it is certainly a sign that this code is not well designed and hence, needs refactoring.

Namespaces almost 100% tested should be 100% tested

This rule is executed only if some code coverage data is imported from some code coverage files.

Often covering the few percents of remaining uncovered code of one or several classes in a namespace requires as much work as covering the first 90%. For this reason, often teams estimate that 90% coverage is enough. However untestable code usually means poorly written code which usually leads to error prone code. So it might be worth refactoring and making sure to cover the few uncovered lines of code because most tricky bugs might come from this small portion of hard-to-test code.

Not all classes should be 100% covered by tests (like UI code can be hard to test) but you should make sure that most of the logic of your application is defined in some easy-to-test classes, 100% covered by tests.

Issues of this rule have a High severity because as explained, such situation is bug-prone.

How to Fix:

Write more unit-tests dedicated to cover code not covered yet in the namespace. If you find some hard-to-test code, it is certainly a sign that this code is not well designed and hence, needs refactoring.

Types that used to be 100% covered by tests should still be 100% covered

This rule is executed only if a baseline for comparison is defined (diff mode).

This rule is executed only if some code coverage data is imported from some code coverage files.

Often covering 10% of remaining uncovered code of a class, requires as much work as covering the first 90%. For this reason, typically teams estimate that 90% coverage is enough. However untestable code usually means poorly written code which usually leads to error prone code. So it might be worth refactoring and making sure to cover the 10% remaining code because most tricky bugs might come from this small portion of hard-to-test code.

Not all classes should be 100% covered by tests (like UI code can be hard to test) but you should make sure that most of the logic of your application is defined in some easy-to-test classes, 100% covered by tests.

In this context, this rule warns when a type fully covered by tests is now only partially covered.

Issues of this rule have a High severity because often, a type that used to be 100% and is not covered anymore is a bug-prone situation that should be carefully handled.

How to Fix:

Write more unit-tests dedicated to cover code not covered anymore. If you find some hard-to-test code, it is certainly a sign that this code is not well designed and hence, needs refactoring.

You'll find code impossible to cover by unit-tests, like calls to MessageBox.Show(). An infrastructure must be defined to be able to mock such code at test-time.

Types tagged with FullCoveredAttribute should be 100% covered

This rule lists methods partially covered by tests, of types tagged with FullCoveredAttribute.

This rule is executed only if some code coverage data is imported from some code coverage files.

By using a FullCoveredAttribute, you can express in source code the intention that a class is 100% covered by tests, and should remain 100% covered in the future. If you don't want to link NDepend.API.dll, you can use your own attribute and adapt the source code of this rule.

Benefits of using a FullCoveredAttribute are twofold: Not only the intention is expressed in source code, but it is also continuously checked by the present rule.

Often covering 10% of remaining uncovered code of a class, requires as much work as covering the first 90%. For this reason, often teams estimate that 90% coverage is enough. However untestable code usually means poorly written code which usually means error prone code. So it might be worth refactoring and making sure to cover the 10% remaining code because most tricky bugs might come from this small portion of hard-to-test code.

Not all classes should be 100% covered by tests (like UI code can be hard to test) but you should make sure that most of the logic of your application is defined in some easy-to-test classes, 100% covered by tests.

Issues of this rule have a High severity because often, a type that used to be 100% and is not covered anymore is a bug-prone situation that should be carefully handled.

How to Fix:

Write more unit-tests dedicated to cover code of matched classes not covered yet. If you find some hard-to-test code, it is certainly a sign that this code is not well designed and hence, needs refactoring.

Types 100% covered should be tagged with FullCoveredAttribute

This rule is executed only if some code coverage data is imported from some code coverage files.

By using a FullCoveredAttribute, you can express in source code the intention that a class is 100% covered by tests, and should remain 100% covered in the future.

Benefits of using a FullCoveredAttribute are twofold: Not only the intention is expressed in source code, but it is also continuously checked by the present rule.

Issues of this rule have an Low severity because they don't reflect a problem, but provide an advice for potential improvement.

How to Fix:

Just tag types 100% covered by tests with the FullCoveredAttribute that can be found in NDepend.API.dll, or by an attribute of yours defined in your own code (in which case this rule must be adapted).

Methods should have a low C.R.A.P score

This rule is executed only if some code coverage data is imported from some code coverage files.

So far this rule is disabled because other code coverage rules assess properly code coverage issues.

Change Risk Analyzer and Predictor (i.e. CRAP) is a code metric that helps in pinpointing overly both complex and untested code. Is has been first defined here: http://www.artima.com/weblogs/viewpost.jsp?thread=215899

The Formula is: CRAP(m) = CC(m)^2 * (1 – cov(m)/100)^3 + CC(m)

• where CC(m) is the cyclomatic complexity of the method m

• and cov(m) is the percentage coverage by tests of the method m

Matched methods cumulates two highly error prone code smells:

• A complex method, difficult to develop and maintain.

• Non 100% covered code, difficult to refactor without introducing any regression bug.

The higher the CRAP score, the more painful to maintain and error prone is the method.

An arbitrary threshold of 30 is fixed for this code rule as suggested by inventors.

Notice that no amount of testing will keep methods with a Cyclomatic Complexity higher than 30, out of CRAP territory.

Notice that this rule doesn't match too short method with less than 10 lines of code.

How to Fix:

In such situation, it is recommended to both refactor the complex method logic into several smaller and less complex methods (that might belong to some new types especially created), and also write unit-tests to full cover the refactored logic.

You'll find code impossible to cover by unit-tests, like calls to MessageBox.Show(). An infrastructure must be defined to be able to mock such code at test-time.

Test Methods

We advise to not include test assemblies in code analyzed by NDepend. We estimate that it is acceptable and practical to lower the quality gate of test code, because the important measures for tests are:

• The coverage ratio,

• And the amount of logic results asserted: This includes both assertions in test code, and assertions in code covered by tests, like Code Contract assertions and Debug.Assert(…) assertions.

But if you wish to enforce the quality of test code, you'll need to consider test assemblies in your list of application assemblies analyzed by NDepend.

In such situation, this code query lists tests methods and you can reuse this code in custom rules.

Methods directly called by test Methods

This query lists all methods directly called by tests methods. Overrides of virtual and abstract methods, called through polymorphism, are not listed. Methods solely invoked through a delegate are not listed. Methods solely invoked through reflection are not listed.

We advise to not include test assemblies in code analyzed by NDepend. We estimate that it is acceptable and practical to lower the quality gate of test code, because the important measures for tests are:

• The coverage ratio,

• And the amount of logic results asserted: This includes both assertions in test code, and assertions in code covered by tests, like Code Contract assertions and Debug.Assert(…) assertions.

But if you wish to run this code query, you'll need to consider test assemblies in your list of application assemblies analyzed by NDepend.

Methods directly and indirectly called by test Methods

This query lists all methods directly or indirectly called by tests methods. Indirectly called by a test means that a test method calls a method, that calls a method… From this recursion, a code metric named depthOfCalledByTests is inferred, The value 1 means directly called by test, the value 2 means called by a method that is called by a test…

Overrides of virtual and abstract methods, called through polymorphism, are not listed. Methods solely invoked through a delegate are not listed. Methods solely invoked through reflection are not listed.

We advise to not include test assemblies in code analyzed by NDepend. We estimate that it is acceptable and practical to lower the quality gate of test code, because the important measures for tests are:

• The coverage ratio,

• And the amount of logic results asserted: This includes both assertions in test code, and assertions in code covered by tests, like Code Contract assertions and Debug.Assert(…) assertions.

But if you wish to run this code query, you'll need to consider test assemblies in your list of application assemblies analyzed by NDepend.

Potentially Dead Types

This rule lists potentially dead types. A dead type is a type that can be removed because it is never used by the program.

This rule lists not only types not used anywhere in code, but also types used only by types not used anywhere in code. This is why this rule comes with a column TypesusingMe and this is why there is a code metric named depth:

• A depth value of 0 means the type is not used.

• A depth value of 1 means the type is used only by types not used.

• etc…

By reading the source code of this rule, you'll see that by default, public types are not matched, because such type might not be used by the analyzed code, but still be used by client code, not analyzed by NDepend. This default behavior can be easily changed.

Note that this rule doesn't match Entity Framework ModelSnapshot classes that are used ony by the EF infrastructure.

How to Fix:

Static analysis cannot provide an exact list of dead types, because there are several ways to use a type dynamically (like through reflection).

For each type matched by this query, first investigate if the type is used somehow (like through reflection). If the type is really never used, it is important to remove it to avoid maintaining useless code. If you estimate the code of the type might be used in the future, at least comment it, and provide an explanatory comment about the future intentions.

If a type is used somehow, but still is matched by this rule, you can tag it with the attribute IsNotDeadCodeAttribute found in NDepend.API.dll to avoid matching the type again. You can also provide your own attribute for this need, but then you'll need to adapt this code rule.

Issues of this rule have a Debt equal to 15 minutes because it only takes a short while to investigate if a type can be safely discarded. The Annual Interest of issues of this rule, the annual cost to not fix such issue, is proportional to the type #lines of code, because the bigger the type is, the more it slows down maintenance.

Potentially Dead Methods

This rule lists potentially dead methods. A dead method is a method that can be removed because it is never called by the program.

This rule lists not only methods not called anywhere in code, but also methods called only by methods not called anywhere in code. This is why this rule comes with a column MethodsCallingMe and this is why there is a code metric named depth:

• A depth value of 0 means the method is not called.

• A depth value of 1 means the method is called only by methods not called.

• etc…

By reading the source code of this rule, you'll see that by default, public methods are not matched, because such method might not be called by the analyzed code, but still be called by client code, not analyzed by NDepend. This default behavior can be easily changed.

How to Fix:

Static analysis cannot provide an exact list of dead methods, because there are several ways to invoke a method dynamically (like through reflection).

For each method matched by this query, first investigate if the method is invoked somehow (like through reflection). If the method is really never invoked, it is important to remove it to avoid maintaining useless code. If you estimate the code of the method might be used in the future, at least comment it, and provide an explanatory comment about the future intentions.

If a method is invoked somehow, but still is matched by this rule, you can tag it with the attribute IsNotDeadCodeAttribute found in NDepend.API.dll to avoid matching the method again. You can also provide your own attribute for this need, but then you'll need to adapt this code rule.

Issues of this rule have a Debt equal to 10 minutes because it only takes a short while to investigate if a method can be safely discarded. On top of these 10 minutes, the depth of usage of such method adds up 3 minutes per unity because dead method only called by dead code takes a bit more time to be investigated.

The Annual Interest of issues of this rule, the annual cost to not fix such issue, is proportional to the type #lines of code, because the bigger the method is, the more it slows down maintenance.

Potentially Dead Fields

This rule lists potentially dead fields. A dead field is a field that can be removed because it is never used by the program.

By reading the source code of this rule, you'll see that by default, public fields are not matched, because such field might not be used by the analyzed code, but still be used by client code, not analyzed by NDepend. This default behavior can be easily changed. Some others default rules in the Visibility group, warn about public fields.

More restrictions are applied by this rule because of some by-design limitations. NDepend mostly analyzes compiled IL code, and the information that an enumeration value or a literal constant (which are fields) is used is lost in IL code. Hence by default this rule won't match such field.

How to Fix:

Static analysis cannot provide an exact list of dead fields, because there are several ways to assign or read a field dynamically (like through reflection).

For each field matched by this query, first investigate if the field is used somehow (like through reflection). If the field is really never used, it is important to remove it to avoid maintaining a useless code element.

If a field is used somehow, but still is matched by this rule, you can tag it with the attribute IsNotDeadCodeAttribute found in NDepend.API.dll to avoid matching the field again. You can also provide your own attribute for this need, but then you'll need to adapt this code rule.

Issues of this rule have a Debt equal to 10 minutes because it only takes a short while to investigate if a method can be safely discarded. The Annual Interest of issues of this rule, the annual cost to not fix such issue, is set by default to 8 minutes per unused field matched.

Wrong usage of IsNotDeadCodeAttribute

The attribute NDepend.Attributes.IsNotDeadCodeAttribute is defined in NDepend.API.dll. This attribute is used to mean that a code element is not used directly, but is used somehow, like through reflection.

This attribute is used in the dead code rules, Potentially dead Types, Potentially dead Methods and Potentially dead Fields. If you don't want to link NDepend.API.dll, you can use your own IsNotDeadCodeAttribute and adapt the source code of this rule, and the source code of the dead code rules.

In this context, this code rule matches code elements (types, methods, fields) that are tagged with this attribute, but still used directly somewhere in the code.

How to Fix:

Just remove IsNotDeadCodeAttribute tagging of types, methods and fields matched by this rule because this tag is not useful anymore.

Don't use CoSetProxyBlanket and CoInitializeSecurity

As soon as some managed code starts being JIT’ed and executed by the CLR, it is too late to call CoInitializeSecurity() or CoSetProxyBlanket(). By this point in time, the CLR has already initialized the COM security environment for the entire Windows process.

How to Fix:

Don't call CoSetProxyBlanket() or CoInitializeSecurity() from managed code.

Instead write an unmanaged "shim" in C++ that will call one or both methods before loading the CLR within the process.

More information about writing such unmanaged "shim" can be found in this StackOverflow answer: https://stackoverflow.com/a/48545055/27194

Don't use System.Random for security purposes

The algorithm used by the implementation of System.Random is weak because random numbers generated can be predicted.

Using predictable random values in a security critical context can lead to vulnerabilities.

How to Fix:

If the matched method is meant to be executed in a security critical context use System.Security.Cryptography.RandomNumberGenerator or System.Security.Cryptography.RNGCryptoServiceProvider instead. These random implementations are slower to execute but the random numbers generated cannot be predicted.

Find more on using RNGCryptoServiceProvider to generate random values here: https://stackoverflow.com/questions/32932679/using-rngcryptoserviceprovider-to-generate-random-string

Otherwise you can use the faster System.Random implementation and suppress corresponding issues.

More information about the weakness of System.Random implementation can be found here: https://stackoverflow.com/a/6842191/27194

Don't use DES/3DES weak cipher algorithms

Since 2005 the NIST, the US National Institute of Standards and Technology, doesn't consider DES and 3DES cypher algorithms as secure. Source: https://www.nist.gov/news-events/news/2005/06/nist-withdraws-outdated-data-encryption-standard

How to Fix:

Use the AES (Advanced Encryption Standard) algorithms instead with the .NET Framework implementation: System.Security.Cryptography.AesCryptoServiceProvider.

You can still suppress issues of this rule when using DES/3DES algorithms for compatibility reasons with legacy applications and data.

Don't disable certificate validation

Matched methods are subscribing a custom certificate validation procedure through the delegate: ServicePointManager.ServerCertificateValidationCallback.

Doing so is often used to disable certificate validation to connect easily to a host that is not signed by a root certificate authority. https://en.wikipedia.org/wiki/Root_certificate

This creates a vulnerability to man-in-the-middle attacks since the client will trust any certificate. https://en.wikipedia.org/wiki/Man-in-the-middle_attack

How to Fix:

Don't rely on a weak custom certificate validation.

If a legitimate custom certificate validation procedure must be subscribed, you can chose to suppress related issue(s).

Review publicly visible event handlers

Review publicly visible event handlers to check those that are running security critical actions.

An event handler is any method with the standard signature (Object,EventArgs). An event handler can be registered to any event matching this standard signature.

As a consequence, such event handler can be subscribed by malicious code to an event to provoke execution of the security critical action on event firing.

Even if such event handler does a security check, it can be executed from a chain of trusted callers on the call stack, and cannot detect about malicious registration.

How to Fix:

Change matched event handlers to make them non-public. Preferably don't run a security critical action from an event handler.

If after a careful check no security critical action is involved from a matched event-handler, you can suppress the issue.

Pointers should not be publicly visible

Pointers should not be exposed publicly.

This rule detects fields with type System.IntPtr or System.UIntPtr that are public or protected.

Pointers are used to access unmanaged memory from managed code. Exposing a pointer publicly makes it easy for malicious code to read and write unmanaged data used by the application.

The situation is even worse if the field is not read-only since malicious code can change it and force the application to rely on arbitrary data.

How to Fix:

Pointers should have the visibility - private or internal.

The estimated Debt, which means the effort to fix such issue, is 15 minutes and 10 additional minutes per method using the field outside its assembly.

The estimated Severity of such issue is Medium, and High if the field is non read-only.

Seal methods that satisfy non-public interfaces

A match of this rule represents a virtual method, publicly visible, defined in a non-sealed public class, that overrides a method of an internal interface.

The interface not being public indicates a process that should remain private.

Hence this situation represents a security vulnerability because it is now possible to create a malicious class, that derives from the parent class and that overrides the method behavior. This malicious behavior will be then invoked by private implementation.

How to Fix:

You can:

- seal the parent class,

- or change the accessibility of the parent class to non-public,

- or implement the method without using the virtual modifier,

- or change the accessibility of the method to non-public.

If after a careful check such situation doesn't represent a security threat, you can suppress the issue.

Review commands vulnerable to SQL injection

This rule matches methods that create a DB command (like an SqlCommand or an OleDbCommand) that call an Execute command method (like ExecuteScalar()) and that don't use command parameters.

This situation is prone to SQL Injection https://en.wikipedia.org/wiki/SQL_injection since malicious SQL code might be injected in string parameters values.

However there might be false positives. So review carefully matched methods and use suppress issues when needed.

To limit the false positives, this rule also checks whether command parameters are accessed from any sub method call. This is a solid indication of non-vulnerability.

How to Fix:

If after a careful check it appears that the method is indeed using some strings to inject parameters values in the SQL query string, command.Parameters.Add(...) must be used instead.

You can get more information on adding parameters explicitly here: https://stackoverflow.com/questions/4892166/how-does-sqlparameter-prevent-sql-injection

Review data adapters vulnerable to SQL injection

This rule matches methods that create a DB adapter (like an SqlDataAdapter or an OleDbDataAdapter) that call the method Fill() and that don't use DB command parameters.

This situation is prone to SQL Injection https://en.wikipedia.org/wiki/SQL_injection since malicious SQL code might be injected in string parameters values.

However there might be false positives. So review carefully matched methods and use suppress issues when needed.

To limit the false positives, this rule also checks whether command parameters are accessed from any sub method call. This is a solid indication of non-vulnerability.

How to Fix:

If after a careful check it appears that the method is indeed using some strings to inject parameters values in the SQL query string, adapter.SelectCommand.Parameters.Add(...) must be used instead (or adapter.UpdateCommand or adapter.InsertCommand, depending on the context).

You can get more information on adding parameters explicitly here: https://stackoverflow.com/questions/4892166/how-does-sqlparameter-prevent-sql-injection

Methods that could have a lower visibility

This rule warns about methods that can be declared with a lower visibility without provoking any compilation error. For example private is a visibility lower than internal which is lower than public.

Narrowing visibility is a good practice because doing so promotes encapsulation. The scope from which methods can be called is then reduced to a minimum.

By default, this rule doesn't match publicly visible methods that could have a lower visibility because it cannot know if the developer left the method public intentionally or not. Public methods matched are declared in non-public types.

By default this rule doesn't match methods with the visibility public that could be internal, declared in a type that is not public (internal, or nested private for example) because this situation is caught by the rule Avoid public methods not publicly visible.

Notice that methods tagged with one of the attribute NDepend.Attributes.CannotDecreaseVisibilityAttribute or NDepend.Attributes.IsNotDeadCodeAttribute, found in NDepend.API.dll are not matched. If you don't want to link NDepend.API.dll but still wish to rely on this facility, you can declare these attributes in your code.

How to Fix:

Declare each matched method with the specified optimal visibility in the CouldBeDeclared rule result column.

By default, this rule matches public methods. If you are publishing an API many public methods matched should remain public. In such situation, you can opt for the coarse solution to this problem by adding in the rule source code && !m.IsPubliclyVisible or you can prefer the finer solution by tagging each concerned method with CannotDecreaseVisibilityAttribute.

Types that could have a lower visibility

This rule warns about types that can be declared with a lower visibility without provoking any compilation error. For example private is a visibility lower than internal which is lower than public.

Narrowing visibility is a good practice because doing so promotes encapsulation. The scope from which types can be consumed is then reduced to a minimum.

By default, this rule doesn't match publicly visible types that could have a lower visibility because it cannot know if the developer left the type public intentionally or not. Public types matched are nested in non-public types.

Notice that types tagged with one of the attribute NDepend.Attributes.CannotDecreaseVisibilityAttribute or NDepend.Attributes.IsNotDeadCodeAttribute, found in NDepend.API.dll are not matched. If you don't want to link NDepend.API.dll but still wish to rely on this facility, you can declare these attributes in your code.

How to Fix:

Declare each matched type with the specified optimal visibility in the CouldBeDeclared rule result column.

By default, this rule matches public types. If you are publishing an API many public types matched should remain public. In such situation, you can opt for the coarse solution to this problem by adding in the rule source code && !m.IsPubliclyVisible or you can prefer the finer solution by tagging each concerned type with CannotDecreaseVisibilityAttribute.

Fields that could have a lower visibility

This rule warns about fields that can be declared with a lower visibility without provoking any compilation error. For example private is a visibility lower than internal which is lower than public.

Narrowing visibility is a good practice because doing so promotes encapsulation. The scope from which fields can be consumed is then reduced to a minimum.

By default, this rule doesn't match publicly visible fields that could have a lower visibility because it cannot know if the developer left the field public intentionally or not. Public fields matched are declared in non-public types.

Notice that fields tagged with one of the attribute NDepend.Attributes.CannotDecreaseVisibilityAttribute or NDepend.Attributes.IsNotDeadCodeAttribute, found in NDepend.API.dll are not matched. If you don't want to link NDepend.API.dll but still wish to rely on this facility, you can declare these attributes in your code.

How to Fix:

Declare each matched field with the specified optimal visibility in the CouldBeDeclared rule result column.

By default, this rule matches public fields. If you are publishing an API some public fields matched should remain public. In such situation, you can opt for the coarse solution to this problem by adding in the rule source code && !m.IsPubliclyVisible or you can prefer the finer solution by tagging eah concerned field with CannotDecreaseVisibilityAttribute.

Types that could be declared as private, nested in a parent type

This rule matches types that can be potentially nested and declared private into another type.

The conditions for a type to be potentially nested into a parent type are:

• the parent type is the only type consuming it,

• the type and the parent type are declared in the same namespace.

Declaring a type as private into a parent type promotes encapsulation. The scope from which the type can be consumed is then reduced to a minimum.

This rule doesn't match classes with extension methods because such class cannot be nested in another type.

How to Fix:

Nest each matched type into the specified parent type and declare it as private.

However nested private types are hardly testable. Hence this rule might not be applied to types consumed directly by tests.

Avoid publicly visible constant fields

This rule warns about constant fields that are visible outside their parent assembly. Such field, when used from outside its parent assembly, has its constant value hard-coded into the client assembly. Hence, when changing the field's value, it is mandatory to recompile all assemblies that consume the field, else the program will run with different constant values in-memory. Certainly in such situation bugs are lurking.

How to Fix:

Declare matched fields as static readonly instead of constant. This way, the field value is safely changeable without the need to recompile client assemblies.

Notice that enumeration value fields suffer from the same potential pitfall. But enumeration values cannot be declared as static readonly hence the rule comes with the condition && !f.IsEnumValue to avoid matching these. Unless you decide to banish public enumerations, just let the rule as is.

Fields should be declared as private

This rule matches non-private and mutable fields. Mutable means that the field value can be modified. Typically mutable fields are non-constant, non-readonly fields.

Fields should be considered as implementation details and as a consequence they should be declared as private.

If something goes wrong with a non-private field, the culprit can be anywhere, and so in order to track down the bug, you may have to look at quite a lot of code.

A private field, by contrast, can only be assigned from inside the same class, so if something goes wrong with that, there is usually only one source file to look at.

Issues of this rule are fast to get fixed, and they have a debt proportional to the number of methods assigning the field.

How to Fix:

Declare a matched mutable field as private, or declare it as readonly.

If code outside the type needs to access the field you can encapsulate the field accesses in a read-write property. At least with a read-write property you can set a debug breakpoint on the property setter, which makes easier to track write-accesses in case of problem.

Constructors of abstract classes should be declared as protected or private

Constructors of abstract classes can only be called from derived classes.

Because a public constructor is creating instances of its class, and because it is forbidden to create instances of an abstract class, an abstract class with a public constructor is wrong design.

Notice that when the constructor of an abstract class is private, it means that derived classes must be nested in the abstract class.

How to Fix:

To fix a violation of this rule, either declare the constructor as protected, or do not declare the type as abstract.

Avoid public methods not publicly visible

This rule warns about methods declared as public whose parent type is not declared as public.

In such situation public means, can be accessed from anywhere my parent type is visible. Some developers think this is an elegant language construct, some others find it misleading.

This rule can be deactivated if you don't agree with it. Read the whole debate here: http://ericlippert.com/2014/09/15/internal-or-public/

By default issues of this rule have a Low severity because they reflect more an advice than a problem.

How to Fix:

Declare the method as internal if it is used outside of its type, else declare it as private.

Event handler methods should be declared as private or protected

Think of a event handler like for example OnClickButton(). Typically such method must be declared as private and shouldn't be called in other context than event firing.

Such method can also be declared as protected because some designers such as the ASP.NET designer, generates such method as protected to let a chance to sub-classes to call it.

How to Fix:

If you have the need that event handler method should be called from another class, then find a code structure that more closely matches the concept of what you're trying to do. Certainly you don't want the other class to click a button; you want the other class to do something that clicking a button also do.

Wrong usage of CannotDecreaseVisibilityAttribute

The attribute NDepend.Attributes.CannotDecreaseVisibilityAttribute is defined in NDepend.API.dll. If you don't want to reference NDepend.API.dll you can declare it in your code.

Usage of this attribute means that a code element visibility is not optimal (it can be lowered like for example from public to internal) but shouldn’t be modified anyway. Typical reasons to do so include:

• Public code elements consumed through reflection, through a mocking framework, through XML or binary serialization, through designer, COM interfaces…

• Non-private code element invoked by test code, that would be difficult to reach from test if it was declared as private.

In such situation CannotDecreaseVisibilityAttribute is used to avoid that default rules about not-optimal visibility warn. Using this attribute can be seen as an extra burden, but it can also be seen as an opportunity to express in code: Don't change the visibility else something will be broken

In this context, this code rule matches code elements (types, methods, fields) that are tagged with this attribute, but still already have an optimal visibility.

How to Fix:

Just remove CannotDecreaseVisibilityAttribute tagging of types, methods and fields matched by this rule because this tag is not useful anymore.

By default issues of this rule have a Low severity because they reflect more an advice than a problem.

Methods that should be declared as 'public' in C#, 'Public' in VB.NET

This code query lists methods that should be declared as public. Such method is actually declared as internal and is consumed from outside its parent assembly thanks to the attribute System.Runtime.CompilerServices.InternalsVisibleToAttribute.

This query relies on the property NDepend.CodeModel.IMember.ShouldBePublic https://www.ndepend.com/api/webframe.html#NDepend.API~NDepend.CodeModel.IMember~ShouldBePublic.html

This is just a code query, it is not intended to advise you to declare the method as public, but to inform you that the code actually relies on the peculiar behavior of the attribute InternalsVisibleToAttribute.

Fields should be marked as ReadOnly when possible

This rule warns about instance and static fields that can be declared as readonly.

This source code of this rule is based on the conditon IField.IsImmutable. https://www.ndepend.com/api/webframe.html#NDepend.API~NDepend.CodeModel.IField~IsImmutable.html

A field that matches the condition IsImmutable is a field that is assigned only by constructors of its class.

For an instance field, this means its value will remain constant through the lifetime of the object.

For a static field, this means its value will remain constant through the lifetime of the program.

How to Fix:

Declare the field with the C# readonly keyword (ReadOnly in VB.NET). This way the intention that the field value shouldn't change is made explicit.

Avoid non-readonly static fields

This rule warns about static fields that are not declared as read-only.

In Object-Oriented-Programming the natural artifact to hold states that can be modified is instance fields. Such mutable static fields create confusion about the expected state at runtime and impairs the code testability since the same mutable state is re-used for each test.

More discussion on the topic can be found here: https://blog.ndepend.com/the-proper-usages-of-the-keyword-static-in-c/

How to Fix:

If the static field is just assigned once in the program lifetime, make sure to declare it as readonly and assign it inline, or from the static constructor.

Else if methods other than the static constructor need to assign the state hold by the static field, refactoring must occur to ensure that this state is hold through an instance field.

Avoid static fields with a mutable field type

This rule warns about static fields whose field type is mutable. In such case the static field is holding a state that can be modified.

In Object-Oriented-Programming the natural artifact to hold states that can be modified is instance fields. Hence such static fields create confusion about the expected state at runtime.

More discussion on the topic can be found here: https://blog.ndepend.com/the-proper-usages-of-the-keyword-static-in-c/

How to Fix:

To fix violations of this rule, make sure to hold mutable states through objects that are passed explicitly everywhere they need to be consumed, in opposition to mutable object hold by a static field that makes it modifiable from a bit everywhere in the program.

Structures should be immutable

An object is immutable if its state doesn’t change once the object has been created. Consequently, a structure or a class is immutable if its instances fields are only assigned inline or from constructor(s).

But for structure it is a bit different. Structures are value types which means instances of structures are copied when they are passed around (like through a method argument).

So if you change a copy you are changing only that copy, not the original and not any other copies which might be around. Such situation is very different than what happen with instances of classes. Hence developers are not used to work with modified values and doing so introduces confusion and is error-prone.

How to Fix:

Make sure matched structures are immutable. This way, all automatic copies of an original instance, resulting from being passed by value will hold the same values and there will be no surprises.

Note that since C#7.2 you can prefix a structure declaration with the keyword readonly to enforce that it is an immutable structure.

If your structure is immutable then if you want to change a value, you have to consciously do it by creating a new instance of the structure with the modified data.

Immutable struct should be declared as readonly

Declare immutable structures as readonly struct. This way the C# compiler and the JIT are informed about the intent to create an immutable type. Some low-level optimizations can then be performed on instances of a readonly struct. For example such instance can be passed or returned by-reference instead of being copied on the stack. This is possible because there is no risk that the called or caller method mutates any value.

More can be read on the readonly struct topic in this documentation: https://learn.microsoft.com/en-us/dotnet/csharp/write-safe-efficient-code#declare-immutable-structs-as-readonly

How to Fix:

Just declare matched structures as readonly struct.

Property Getters should be immutable

It is not expected that a state gets modified when accessing a property getter. Hence doing so create confusion and property getters should be pure methods, they shouldn't assign any field.

This rule doesn't match property getters that assign a field not assigned by any other methods than the getter itself and the corresponding property setter. Hence this rule avoids matching lazy initialization at first access of a state. In such situation the getter assigns a field at first access and from the client point of view, lazy initialization is an invisible implementation detail.

A field assigned by a property with a name similar to the property name are not count either, also to avoid matching lazy initialization at first access situations.

How to Fix:

Make sure that matched property getters don't assign any field.

The estimated Debt, which means the effort to fix such issue, is equal to 2 minutes plus 5 minutes per field assigned and 5 minutes per other method assigning such field.

A field must not be assigned from outside its parent hierarchy types

This rule is related to the rule Fields should be declared as private. It matches any public or internal, mutable field that is assigned from outside its parent class and subclasses.

Fields should be considered as implementation details and as a consequence they should be declared as private.

If something goes wrong with a non-private field, the culprit can be anywhere, and so in order to track down the bug, you may have to look at quite a lot of code.

A private field, by contrast, can only be assigned from inside the same class, so if something goes wrong with that, there is usually only one source file to look at.

How to Fix:

Matched fields must be declared as protected and even better as private.

Alternatively, if the field can reference immutable states, it can remain visible from the outside, but then must be declared as readonly.

The estimated Debt, which means the effort to fix such issue, is equal to 5 minutes per method outside the parent hierarchy that assigns the matched field.

Don't assign a field from many methods

A field assigned from many methods is a symptom of bug-prone code. Notice that:

• For an instance field, constructor(s) of its class that assign the field are not counted.

• For a static field, the class constructor that assigns the field is not counted.

The default threshold for instance fields is equal to 4 or more than 4 methods assigning the instance field. Such situation makes harder to anticipate the field state at runtime. The code is then complicated to read, hard to debug and hard to maintain. Hard-to-solve bugs due to corrupted state are often the consequence of fields anarchically assigned.

The situation is even more complicated if the field is static. Indeed, such situation potentially involves global random accesses from various parts of the application. This is why this rule provides a lower threshold equals to 2 or more than 2 methods assigning the static field.

If the object containing such field is meant to be used from multiple threads, there are alarming chances that the code is unmaintainable and bugged. When multiple threads are involved, the rule of thumb is to use immutable objects.

If the field type is a reference type (interfaces, classes, strings, delegates) corrupted state might result in a NullReferenceException. If the field type is a value type (number, boolean, structure) corrupted state might result in wrong result not even signaled by an exception thrown.

How to Fix:

There is no straight advice to refactor the number of methods responsible for assigning a field. Sometime the situation is simple enough, like when a field that hold an indentation state is assigned by many writer methods. Such situation only requires to define two methods IndentPlus()/IndentMinus() that assign the field, called from all writers methods.

Sometime the solution involves rethinking and then rewriting a complex algorithm. Such field can sometime become just a variable accessed locally by a method or a closure. Sometime, just rethinking the life-time and the role of the parent object allows the field to become immutable (i.e assigned only by the constructor).

The estimated Debt, which means the effort to fix such issue, is equal to 4 minutes plus 5 minutes per method assigning the instance field or 10 minutes per method assigning the static field.

Do not declare read only mutable reference types

This rule is violated when a public or internal type contains a public or internal read-only field whose field type is a mutable reference type.

This situation gives the false impression that the value can't change, when actually it's only the field value that can't change, but the object state can still change.

How to Fix:

To fix a violation of this rule, replace the field type with an immutable type, or declare the field as private.

By default issues of this rule have a Low severity because they reflect more an advice than a problem.

Array fields should not be read only

This rule is violated when a publicly visible field that holds an array, is declared read-only.

This situation represents a security vulnerability. Because the field is read-only it cannot be changed to refer to a different array. However, the elements of the array that are stored in a read-only field can be changed. Code that makes decisions or performs operations that are based on the elements of a read-only array that can be publicly accessed might contain an exploitable security vulnerability.

How to Fix:

To fix the security vulnerability that is identified by this rule do not rely on the contents of a read-only array that can be publicly accessed. It is strongly recommended that you use one of the following procedures:

• Replace the array with a strongly typed collection that cannot be changed. See for example: System.Collections.Generic.IReadOnlyList<T> ; System.Collections.Generic.IReadOnlyCollection<T> ; System.Collections.ReadOnlyCollectionBase

• Or replace the public field with a method that returns a clone of a private array. Because your code does not rely on the clone, there is no danger if the elements are modified.

By default issues of this rule have a Low severity because they reflect more an advice than a problem.

Types tagged with ImmutableAttribute must be immutable

An object is immutable if its state doesn’t change once the object has been created. Consequently, a structure or a class is immutable if its instances fields are only assigned inline or from constructor(s).

An attribute NDepend.Attributes.ImmutableAttribute can be used to express in code that a type is immutable. In such situation, the present code rule checks continuously that the type remains immutable whatever the modification done.

This rule warns when a type that is tagged with ImmutableAttribute is actually not immutable anymore.

Notice that FullCoveredAttribute is defined in NDepend.API.dll and if you don't want to link this assembly, you can create your own FullCoveredAttribute and adapt the rule.

How to Fix:

First understand which modification broke the type immutability. The list of culpritFields provided in this rule result can help. Then try to refactor the type to bring it back to immutability.

The estimated Debt, which means the effort to fix such issue, is equal to 5 minutes plus 10 minutes per culprit field.

Types immutable should be tagged with ImmutableAttribute

An object is immutable if its state doesn’t change once the object has been created. Consequently, a structure or a class is immutable if its instances fields are only assigned inline or from constructor(s).

This code query lists immutable type that are not tagged with an attribute named NDepend.Attributes.ImmutableAttribute. You can define such attribute in your code base. By using an ImmutableAttribute, you can express in source code the intention that a class is immutable, and should remain immutable in the future. Benefits of using an ImmutableAttribute are twofold:

• Not only the intention is expressed in source code,

• but it is also continuously checked by the rule Types tagged with ImmutableAttribute must be immutable.

How to Fix:

Just tag types matched by this code query with ImmutableAttribute that can be found in NDepend.API.dll, or by an attribute of yours defined in your own code (in which case this code query must be adapted).

Methods tagged with PureAttribute must be pure

A method is pure if its execution doesn’t change the value of any instance or static field. A pure method is just a function that output a result from inputs. Pure methods naturally simplify code by limiting side-effects.

An attribute PureAttribute can be used to express in code that a method is pure. In such situation, the present code rule checks continuously that the method remains pure whatever the modification done.

This rule warns when a method that is tagged with PureAttribute is actually not pure anymore.

Notice that NDepend.Attributes.PureAttribute is defined in NDepend.API.dll and if you don't want to link this assembly, you can also use System.Diagnostics.Contracts.PureAttribute or create your own PureAttribute and adapt the rule.

Notice that System.Diagnostics.Contracts.PureAttribute is taken account by the compiler only when the VS project has Microsoft Code Contract enabled.

How to Fix:

First understand which modification broke the method purity. Then refactor the method to bring it back to purity.

Pure methods should be tagged with PureAttribute

A method is pure if its execution doesn’t change the value of any instance or static field. Pure methods naturally simplify code by limiting side-effects.

This code query lists pure methods that are not tagged with a PureAttribute. By using such attribute, you can express in source code the intention that a method is pure, and should remain pure in the future. Benefits of using a PureAttribute are twofold:

• Not only the intention is expressed in source code,

• but it is also continuously checked by the rule Methods tagged with PureAttribute must be pure.

This code query is not by default defined as a code rule because certainly many of the methods of the code base are matched. Hence fixing all matches and then maintaining the rule unviolated might require a lot of work. This may counter-balance such rule benefits.

How to Fix:

Just tag methods matched by this code query with NDepend.Attributes.PureAttribute that can be found in NDepend.API.dll, or with System.Diagnostics.Contracts.PureAttribute, or with an attribute of yours defined in your own code (in which case this code query must be adapted).

Notice that System.Diagnostics.Contracts.PureAttribute is taken account by the compiler only when the VS project has Microsoft Code Contract enabled.

Record classes should be immutable

The language intention for C#9 record is to make it easy to create classes with value-based semantic. Value-based semantic for a class means 1) Value-based equality and 2) Immutability. These are explained in this article: https://blog.ndepend.com/c9-records-immutable-classes/

However it is still possible to create a mutable state in a record with a property setter that is not declared as init.

It is recommended to avoid having mutable states in a record class because this breaks the value-based semantic. For example changing the state of a record object used as a key in a hash table can corrupt the hash table integrity.

Also changing the state of a record object can lead to unexpected value-based equality results. In both cases such code-smell ends up provoking bugs that are difficult to spot and difficult to fix.

How to Fix:

To fix an issue of this rule you must make sure that the matched record becomes immutable. To do so mutable property setters (culpritSetters in the result) of the setter must be transformed in property initializers with the init C# keyword. Callers of the mutable property setters (methodsCallingCulpritSetters in the result) must be also refactored to avoid changing the record states.

The estimated Debt, which means the effort to fix such issue, is equal to 8 minutes plus 3 minutes per mutable property setter and per method calling such mutable property setter.

Instance fields naming convention

By default the presents rule supports the 3 most used naming conventions for instance fields:

• Instance field name starting with a lower-case letter

• Instance field name starting with "_" followed with a lower-case letter

• Instance field name starting with "m_" followed with an upper-case letter

The rule can be easily adapted to your own company naming convention.

In terms of behavior, a static field is something completely different than an instance field, so it is interesting to differentiate them at a glance through a naming convetion.

This is why it is advised to use a specific naming convention for instance field like name that starts with m_.

Related discussion: https://blog.ndepend.com/on-hungarian-notation-for-fields-in-csharp/

How to Fix:

Once the rule has been adapted to your own naming convention make sure to name all matched instance fields adequately.

Static fields naming convention

By default the presents rule supports the 3 most used naming conventions for static fields:

• Static field name starting with an upper-case letter

• Static field name starting with "_" followed with an upper-case letter

• Static field name starting with "s_" followed with an upper-case letter

The rule can be easily adapted to your own company naming convention.

In terms of behavior, a static field is something completely different than an instance field, so it is interesting to differentiate them at a glance through a naming convetion.

This is why it is advised to use a specific naming convention for static field like name that starts with s_.

Related discussion: https://blog.ndepend.com/on-hungarian-notation-for-fields-in-csharp/

How to Fix:

Once the rule has been adapted to your own naming convention make sure to name all matched static fields adequately.

Interface name should begin with a 'I'

In the .NET world, interfaces names are commonly prefixed with an upper case I. This rule warns about interfaces whose names don't follow this convention. Because this naming convention is widely used and accepted, we recommend abiding by this rule.

Typically COM interfaces names don't follow this rule. Hence this code rule doesn't take care of interfaces tagged with ComVisibleAttribute.

How to Fix:

Make sure that matched interfaces names are prefixed with an upper I.

Abstract base class should be suffixed with 'Base'

This rule warns about abstract classes whose names are not suffixed with Base. It is a common practice in the .NET world to suffix base classes names with Base.

Notice that this rule doesn't match abstract classes that are in a middle of a hierarchy chain. In other words, only base classes that derive directly from System.Object are matched.

How to Fix:

Suffix the names of matched base classes with Base.

Exception class name should be suffixed with 'Exception'

This rule warns about exception classes whose names are not suffixed with Exception. It is a common practice in the .NET world to suffix exception classes names with Exception.

For exception base classes, the suffix ExceptionBase is also accepted.

How to Fix:

Suffix the names of matched exception classes with Exception.

Attribute class name should be suffixed with 'Attribute'

This rule warns about attribute classes whose names are not suffixed with Attribute. It is a common practice in the .NET world to suffix attribute classes names with Attribute.

How to Fix:

Suffix the names of matched attribute classes with Attribute.

Types name should begin with an Upper character

This rule warns about types whose names don't start with an Upper character. It is a common practice in the .NET world to use Pascal Casing Style to name types.

Pascal Casing Style : The first letter in the identifier and the first letter of each subsequent concatenated word are capitalized. For example: BackColor

How to Fix:

Pascal Case the names of matched types.

Methods name should begin with an Upper character

This rule warns about methods whose names don't start with an Upper character. It is a common practice in the .NET world to use Pascal Casing Style to name methods.

Pascal Casing Style : The first letter in the identifier and the first letter of each subsequent concatenated word are capitalized. For example: ComputeSize

How to Fix:

Pascal Case the names of matched methods.

Do not name enum values 'Reserved'

This rule assumes that an enumeration member with a name that contains "Reserved" is not currently used but is a placeholder to be renamed or removed in a future version. Renaming or removing a member is a breaking change. You should not expect users to ignore a member just because its name contains "Reserved" nor can you rely on users to read or abide by documentation. Furthermore, because reserved members appear in object browsers and smart integrated development environments, they can cause confusion as to which members are actually being used.

Instead of using a reserved member, add a new member to the enumeration in the future version.

In most cases, the addition of the new member is not a breaking change, as long as the addition does not cause the values of the original members to change.

How to Fix:

To fix a violation of this rule, remove or rename the member.

Avoid types with name too long

Types with a name too long tend to decrease code readability. This might also be an indication that a type is doing too much.

This rule matches types with names with more than 40 characters.

How to Fix:

To fix a violation of this rule, rename the type with a shortest name or eventually split the type in several more fine-grained types.

Avoid methods with name too long

Methods with a name too long tend to decrease code readability. This might also be an indication that a method is doing too much.

This rule matches methods with names with more than 40 characters.

However it is considered as a good practice to name unit tests in such a way with a very expressive name, hence this rule doens't match methods tagged with FactAttribute, TestAttribute and TestCaseAttribute.

How to Fix:

To fix a violation of this rule, rename the method with a shortest name that equally conveys the behavior of the method. Or eventually split the method into several smaller methods.

Avoid fields with name too long

Fields with a name too long tend to decrease code readability.

This rule matches fields with names with more than 40 characters.

How to Fix:

To fix a violation of this rule, rename the field with a shortest name that equally conveys the same information.

Avoid having different types with same name

This rule warns about multiple types with same name, that are defined in different application or third-party namespaces or assemblies.

Such practice create confusion and also naming collision in source files that use different types with same name.

How to Fix:

To fix a violation of this rule, rename concerned types.

Avoid prefixing type name with parent namespace name

This rule warns about situations where the parent namespace name is used as the prefix of a contained type.

For example a type named "RuntimeEnvironment" declared in a namespace named "Foo.Runtime" should be named "Environment".

Such situation creates naming redundancy with no readability gain.

How to Fix:

To fix a violation of this rule, remove the prefix from the type name.

Avoid naming types and namespaces with the same identifier

This rule warns when a type and a namespace have the same name.

For example when a type is named Environment and a namespace is named Foo.Environment.

Such situation provokes tedious compiler resolution collision, and makes the code less readable because concepts are not concisely identified.

How to Fix:

To fix a violation of this rule, renamed the concerned type or namespace.

Don't call your method Dispose

In .NET programming, the identifier Dispose should be kept only for implementations of System.IDisposable.

This rule warns when a method is named Dispose(), but the parent type doesn't implement System.IDisposable.

How to Fix:

To fix a violation of this rule, either make the parent type implements System.IDisposable, or rename the Dispose() method with another identifier like: Close() Terminate() Finish() Quit() Exit() Unlock() ShutDown()…

Methods prefixed with 'Try' should return a boolean

When a method has a name prefixed with Try, it is expected that it returns a boolean, that reflects the method execution status, success or failure.

Such method usually returns a result through an out parameter. For example: System.Int32.TryParse(int,out string):bool

How to Fix:

To fix a violation of this rule, Rename the method, or transform it into an operation that can fail.

Properties and fields that represent a collection of items should be named Items.

A good practice to make the code more readable and more predictable is to name properties and fields typed with a collection of items with the plural form of Items.

Depending on the domain of your application, a proper identifier could be NewDirectories, Words, Values, UpdatedDates.

Also this rule doesn't warn when any word in the identifier ends with an s. This way identifiers like TasksToRun, KeysDisabled, VersionsSupported, ChildrenFilesPath, DatedValuesDescending, ApplicationNodesChanged or ListOfElementsInResult are valid and won't be seen as violations.

Moreover this rule won't warn for a field or property with an identifier that contain the word Empty. This is a common pattern to define an immutable and empty collection instance shared.

Before inspecting properties and fields, this rule gathers application and third-party collection types that might be returned by a property or a field. To do so this rule searches types that implement IEnumerable<T> except:

- Non generic types: Often a non generic type is not seen as a collection. For example System.String implements IEnumerable<char>, but a string is rarely named as a collection of characters. In others words, we have much more strings in our program named like FirstName than named like EndingCharacters.

- Dictionaries types: A dictionary is more than a collection of pairs, it is a mapping from one domain to another. A common practice is to suffix the name of a dictionary with Map Table or Dictionary, although often dictionaries names satify this rule with names like GuidsToPersons or PersonsByNames.

How to Fix:

Just rename the fields and properties accordingly, by making plural the word in the identifier that describes best the items in the collection.

For example:

- ListOfDir can be renamed Directories.

- Children can be renamed ChildrenItems

- QueueForCache can be renamed QueueOfItemsForCache

DDD ubiquitous language check

The language used in identifiers of classes, methods and fields of the core domain, should be based on the Domain Model. This constraint is known as ubiquitous language in Domain Driven Design (DDD) and it reflects the need to be rigorous with naming, since software doesn't cope well with ambiguity.

This rule is disabled per default because its source code needs to be customized to work, both with the core domain namespace name (that contains classes and types to be checked), and with the list of domain language terms.

If a term needs to be used both with singular and plural forms, both forms need to be mentioned, like Seat and Seats for example. Notice that this default rule is related with the other default rule Properties and fields that represent a collection of items should be named Items defined in the Naming Convention group.

This rule implementation relies on the NDepend API ExtensionMethodsString.GetWords(this string identifier) extension method that extracts terms from classes, methods and fields identifiers in a smart way.

How to Fix:

For each violation, this rule provides the list of words not in vocabulary.

To fix a violation of this rule, either rename the concerned code element or update the domain language terms list defined in this rule source code, with the missing term(s).

Avoid fields with same name in class hierarchy

This rule matches a field whose name is already used by another field in the base class hierarchy.

The C# and VB.NET compilers allow this situation even if the base class field is visible to derived classes with a visibility different than private.

However this situation is certainly a sign of an erroneous attempt to redefine a field in a derived class.

How to Fix:

Check if the field in the derived class is indeed a redefinition of the base class field. Check also that both fields types corresponds. If fields are static, double check that only a single instance of the referenced object is needed. If all checks are positive delete the derived class field and make sure that the base class field is visible to derived classes with the protected visibility.

If no, rename the field in the derived class and be very careful in renaming all usages of this field, they might be related with the base class field.

Avoid various capitalizations for method name

This rule matches application methods whose names differ only in capitalization.

With this rule you'll discover various names like ProcessOrderId and ProcessOrderID. It is important to choose a single capitalization used accross the whole application.

Matched methods are not necessarily declared in the same type. However if various capitalizations of a method name are found within the same type, the issue severity goes from Medium to Critical. Indeed, this situation is not just a matter of convention, it is error-prone. It forces type's clients to investigate which version of the method to call.

How to Fix:

Choose a single capitalization for the method name used accross the whole application.

Or alternatively make the distinction clear by having different method names that don't only differ by capitalization.

The technical-debt for each issue, the estimated cost to fix an issue, is proportional to the number of capitalizations found (2 minimum).

Controller class name should be suffixed with 'Controller'

This rule warns about ASP.NET Controller classes whose names are not suffixed with Controller, this is a recommended practice: https://docs.microsoft.com/en-us/aspnet/core/mvc/controllers/actions

For Controller base classes, the suffix ControllerBase is also accepted.

How to Fix:

Suffix the names of matched Controller classes with Controller.

Avoid referencing source file out of Visual Studio project directory

A source file located outside of the VS project directory can be added through: > Add > Existing Items… > Add As Link

Doing so can be used to share types definitions across several assemblies. This provokes type duplication at binary level. Hence maintainability is degraded and subtle versioning bug can appear.

This rule matches types whose source files are not declared under the directory that contains the related Visual Studio project file, or under any sub-directory of this directory.

This practice can be tolerated for certain types shared across executable assemblies. Such type can be responsible for startup related concerns, such as registering custom assembly resolving handlers or checking the .NET Framework version before loading any custom library.

How to Fix:

To fix a violation of this rule, prefer referencing from a VS project only source files defined in sub-directories of the VS project file location.

By default issues of this rule have a Low severity because they reflect more an advice than a problem.

Avoid duplicating a type definition across assemblies

A source file located outside of the VS project directory can be added through: > Add > Existing Items… > Add As Link

This rule warns about using this feature to share code across several assemblies. This provokes type duplication at binary level. Hence maintainability is degraded and subtle versioning bug can appear.

Each match represents a type duplicated. Unfolding the types in the column typesDefs will show the multiple definitions across multiple assemblies.

This practice can be tolerated for certain types shared across executable assemblies. Such type can be responsible for startup related concerns, such as registering custom assembly resolving handlers or checking the .NET Framework version before loading any custom library.

How to Fix:

To fix a violation of this rule, prefer sharing types through DLLs.

Avoid defining multiple types in a source file

Defining multiple types in a single source file decreases code readability, because developers are used to see all types in a namespace, when expanding a folder in the Visual Studio Solution Explorer. Also doing so, leads to source files with too many lines.

Each match of this rule is a source file that contains several types definitions, indexed by one of those types, preferably the one with the same name than the source file name without file extension, if any.

How to Fix:

To fix a violation of this rule, create a source file for each type.

By default issues of this rule have a Low severity because they reflect more an advice than a problem.

Namespace name should correspond to file location

Types with source files stored in the same directory, should be declared in the same namespace

For a solid code structure and organization, do mirror the namespaces hierarchy and the directories hierarchy containing source files.

Doing so is a widely accepted convention, and not respecting this convention will lead to less maintainable and less browsable code.

Respecting this convention means that types with source files stored in the same directory, should be declared in the same namespace.

For each directory that contains several source files, where most types are declared in a namespace (what we call the main namespace) and a few types are declared out of the main namespace, this code rule matches:

• The main namespace

• typesOutOfMainNamespace: Types declared in source files in the main namespace's directory but that are not in the main namespace.

• typesInMainNamespace: And for informational purposes, types declared in source files in the main namespace's directory, and that are in the main namespace.

How to Fix:

Violations of this rule are types in the typesOutOfMainNamespace column. Typically such type …

• … is contained in the wrong namespace but its source file is stored in the right directory. In such situation the type should be contained in main namespace.

• … is contained in the right namespace but its source file is stored in the wrong directory In such situation the source file of the type must be moved to the proper parent namespace directory.

• … is declared in multiple source files, stored in different directories. In such situation it is preferable that all source files are stored in a single directory.

The estimated Debt, which means the effort to fix such issue, is equal to 2 minutes plus 5 minutes per type in typesOutOfMainNamespace.

Types declared in the same namespace, should have their source files stored in the same directory

For a solid code structure and organization, do mirror the namespaces hierarchy and the directories hierarchy containing source files.

Doing so is a widely accepted convention, and not respecting this convention will lead to less maintainable and less browsable code.

Respecting this convention means that types declared in the same namespace, should have their source files stored in the same directory.

For each namespace that contains types whose source files are declared in several directories, infer the main directory, the directory that naturally hosts source files of types, preferably the directory whose name corresponds with the namespace name. In this context, this code rule matches:

• The namespace

• typesDeclaredOutOfMainDir: types in the namespace whose source files are stored out of the main directory.

• The main directory

• typesDeclaredInMainDir: for informational purposes, types declared in the namespace, whose source files are stored in the main directory.

How to Fix:

Violations of this rule are types in the typesDeclaredOutOfMainDir column. Typically such type…

• … is contained in the wrong namespace but its source file is stored in the right directory. In such situation the type should be contained in the namespace corresponding to the parent directory.

• … is contained in the right namespace but its source file is stored in the wrong directory. In such situation the source file of the type must be moved to the main directory.

• … is declared in multiple source files, stored in different directories. In such situation it is preferable that all source files are stored in a single directory.

The estimated Debt, which means the effort to fix such issue, is equal to 2 minutes plus 5 minutes per type in typesDeclaredOutOfMainDir.

Mark ISerializable types with SerializableAttribute

To be recognized by the CLR as serializable, types must be marked with the SerializableAttribute attribute even if the type uses a custom serialization routine through implementation of the ISerializable interface.

This rule matches types that implement ISerializable and that are not tagged with SerializableAttribute.

How to Fix:

To fix a violation of this rule, tag the matched type with SerializableAttribute .

Mark assemblies with CLSCompliant (deprecated)

This rule has been deprecated and, as a consequence, it is disabled by default. Feel free to re-enable it if it makes sense in your dev environment.

The Common Language Specification (CLS) defines naming restrictions, data types, and rules to which assemblies must conform if they are to be used across programming languages. Good design dictates that all assemblies explicitly indicate CLS compliance with CLSCompliantAttribute. If the attribute is not present on an assembly, the assembly is not compliant.

Notice that it is possible for a CLS-compliant assembly to contain types or type members that are not compliant.

This rule matches assemblies that are not tagged with System.CLSCompliantAttribute.

How to Fix:

To fix a violation of this rule, tag the assembly with CLSCompliantAttribute.

Instead of marking the whole assembly as non-compliant, you should determine which type or type members are not compliant and mark these elements as such. If possible, you should provide a CLS-compliant alternative for non-compliant members so that the widest possible audience can access all the functionality of your assembly.

Mark assemblies with ComVisible (deprecated)

This rule has been deprecated and, as a consequence, it is disabled by default. Feel free to re-enable it if it makes sense in your dev environment.

The ComVisibleAttribute attribute determines how COM clients access managed code. Good design dictates that assemblies explicitly indicate COM visibility. COM visibility can be set for a whole assembly and then overridden for individual types and type members. If the attribute is not present, the contents of the assembly are visible to COM clients.

This rule matches assemblies that are not tagged with System.Runtime.InteropServices.ComVisibleAttribute.

How to Fix:

To fix a violation of this rule, tag the assembly with ComVisibleAttribute.

If you do not want the assembly to be visible to COM clients, set the attribute value to false.

Mark attributes with AttributeUsageAttribute

When you define a custom attribute, mark it by using AttributeUsageAttribute to indicate where in the source code the custom attribute can be applied. The meaning and intended usage of an attribute will determine its valid locations in code. For example, you might define an attribute that identifies the person who is responsible for maintaining and enhancing each type in a library, and that responsibility is always assigned at the type level. In this case, compilers should enable the attribute on classes, enumerations, and interfaces, but should not enable it on methods, events, or properties. Organizational policies and procedures would dictate whether the attribute should be enabled on assemblies.

The System.AttributeTargets enumeration defines the targets that you can specify for a custom attribute. If you omit AttributeUsageAttribute, your custom attribute will be valid for all targets, as defined by the All value of AttributeTargets enumeration.

This rule matches attribute classes that are not tagged with System.AttributeUsageAttribute.

Abstract attribute classes are not matched since AttributeUsageAttribute can be deferred to derived classes.

Attribute classes that have a base class tagged with AttributeUsageAttribute are not matched since in this case attribute usage is inherited.

How to Fix:

To fix a violation of this rule, specify targets for the attribute by using AttributeUsageAttribute with the proper AttributeTargets values.

Remove calls to GC.Collect()

It is preferable to avoid calling GC.Collect() explicitly in order to avoid some performance pitfall.

More in information on this here: http://blogs.msdn.com/ricom/archive/2004/11/29/271829.aspx

This rule matches application methods that call an overload of the method GC.Collect().

How to Fix:

Remove matched calls to GC.Collect().

Don't call GC.Collect() without calling GC.WaitForPendingFinalizers()

It is preferable to avoid calling GC.Collect() explicitly in order to avoid some performance pitfall. This situation is checked through the default rules: Remove calls to GC.Collect()

But if you wish to call GC.Collect() anyway, you must do it this way:

GC.Collect();

GC.WaitForPendingFinalizers();

GC.Collect();

To make sure that finalizer got executed, and object with finalizer got cleaned properly.

This rule matches application methods that call an overload of the method GC.Collect(), without calling GC.WaitForPendingFinalizers().

How to Fix:

To fix a violation of this rule, if you really need to call GC.Collect(), make sure to call GC.WaitForPendingFinalizers() properly.

Enum Storage should be Int32

An enumeration is a value type that defines a set of related named constants. By default, the System.Int32 data type is used to store the constant value.

Even though you can change this underlying type, it is not necessary or recommended for most scenarios. Note that no significant performance gain is achieved by using a data type that is smaller than Int32. If you cannot use the default data type, you should use one of the Common Language System (CLS)-compliant integral types, Byte, Int16, Int32, or Int64 to make sure that all values of the enumeration can be represented in CLS-compliant programming languages.

This rule matches enumerations whose underlying type used to store values is not System.Int32.

How to Fix:

To fix a violation of this rule, unless size or compatibility issues exist, use Int32. For situations where Int32 is not large enough to hold the values, use Int64. If backward compatibility requires a smaller data type, use Byte or Int16.

Do not raise too general exception types

The following exception types are too general to provide sufficient information to the user:

• System.Exception

• System.ApplicationException

• System.SystemException

If you throw such a general exception type in a library or framework, it forces consumers to catch all exceptions, including unknown exceptions that they do not know how to handle.

This rule matches methods that create an instance of such general exception class.

How to Fix:

To fix a violation of this rule, change the type of the thrown exception to either a more derived type that already exists in the framework, or create your own type that derives from System.Exception.

The estimated Debt, which means the effort to fix such issue, is equal to 15 minutes per method matched, plus 5 minutes per too general exception types instantiated by the method.

Do not raise reserved exception types

The following exception types are reserved and should be thrown only by the Common Language Runtime:

• System.ExecutionEngineException

• System.IndexOutOfRangeException

• System.NullReferenceException

• System.OutOfMemoryException

• System.StackOverflowException

• System.InvalidProgramException

• System.AccessViolationException

• System.CannotUnloadAppDomainException

• System.BadImageFormatException

• System.DataMisalignedException

Do not throw an exception of such reserved type.

This rule matches methods that create an instance of such reserved exception class.

How to Fix:

To fix a violation of this rule, change the type of the thrown exception to a specific type that is not one of the reserved types.

Concerning the particular case of a method throwing System.NullReferenceException, often the fix will be either to throw instead System.ArgumentNullException, either to use a contract (through MS Code Contracts API or Debug.Assert()) to signify that a null reference at that point can only be the consequence of a bug.

More generally the idea of using a contract instead of throwing an exception in case of corrupted state / bug consequence detected is a powerful idea. It replaces a behavior (throwing exception) with a declarative assertion that basically means: at that point a bug somehow provoqued the detected corrupted state and continuing any processing from now is potentially harmful. The process should be shutdown and the circonstances of the failure should be reported as a bug to the product team.

Uri fields should be of type System.Uri

A field with the name ending with 'Uri' or 'Url' is deemed to represent a Uniform Resource Identifier or Locator. Such field should be of type System.Uri.

This rule matches fields with the name ending with 'Uri' or 'Url' that are not typed with System.Uri.

How to Fix:

Rename the field, or change the field type to System.Uri.

By default issues of this rule have a Low severity because they reflect more an advice than a problem.

Types should not extend System.ApplicationException

At .NET Framework version 1 time, it was recommended to derive new exceptions from ApplicationException.

The recommendation has changed and new exceptions should derive from System.Exception or one of its subclasses in the System namespace.

This rule matches application exception classes that derive from ApplicationException.

How to Fix:

Make sure that matched exception types, derive from System.Exception or one of its subclasses in the System namespace.

Don't Implement ICloneable

The interface System.ICloneable is proposed since the first version of .NET. It is considered as a bad API for several reasons.

First, this interface existed even before .NET 2.0 that introduced generics. Hence this interface is not generic and the Clone() method returns an object reference that needs to be downcasted to be useful.

Second, this interface doesn't make explicit whether the cloning should be deep or shallow. The difference between the two behaviors is fundamental (explanation here https://stackoverflow.com/a/184745/27194). Not being able to make the intention explicit leads to confusion.

Third, classes that derive from a class that implements ICloneable must also implement the Clone() method, and it is easy to forget this constraint.

This rule doesn't warn for classes that derive from a class that implements ICloneable. In this case the issue must be fixed in the base class, or is maybe not fixable if the base class is declared in a third-party assembly.

How to Fix:

Don't implement anymore this interface.

You can rename the remaining Clone() methods to DeepClone() or ShallowClone() with a typed result.

Or you can propose two custom generic interfaces IDeepCloneable<T> with the single method DeepClone():T and IShallowCloneable<T> with the single method ShallowClone():T.

Finally you can write custom NDepend rules to make sure that all classes that derive from a class with a virtual clone method, override this method.

Collection properties should be read only

A writable collection property allows a user to replace the collection with a completely different collection. A read-only property stops the collection from being replaced but still allows the individual members to be set. If replacing the collection is a goal, the preferred design pattern is to include a method to remove all the elements from the collection and a method to re-populate the collection. See the Clear() and AddRange() methods of the System.Collections.Generic.List<T> class for an example of this pattern.

Both binary and XML serialization support read-only properties that are collections. The System.Xml.Serialization.XmlSerializer class has specific requirements for types that implement ICollection and System.Collections.IEnumerable in order to be serializable.

This rule matches property setter methods that assign a collection object.

How to Fix:

To fix a violation of this rule, make the property read-only and, if the design requires it, add methods to clear and re-populate the collection.

Don't use .NET 1.x HashTable and ArrayList (deprecated)

This rule has been deprecated and, as a consequence, it is disabled by default. Feel free to re-enable it if it makes sense in your dev environment.

This rule warns about application methods that use a non-generic collection class, including ArrayList, HashTable, Queue, Stack or SortedList.

How to Fix:

List<T> should be preferred over ArrayList. It is generic hence you get strongly typed elements. Also, it is faster with T as a value types since it avoids boxing.

For the same reasons:

• Dictionary<K,V> should be prevered over HashTable.

• Queue<T> should be prevered over Queue.

• Stack<T> should be prevered over Stack.

• SortedDictionary<K,V> or SortedList<K,V> should be prevered over SortedList.

You can be forced to use non generic collections because you are using third party code that requires working with these classes or because you are coding with .NET 1.x, but nowadays this situation should question about using newer updates of .NET. .NET 1.x is an immature platform conpared to newer .NET updates.

Caution with List.Contains()

This code query matches calls to List<T>.Contains() method.

The cost of checking if a list contains an object is proportional to the size of the list. In other words it is a O(N) operation. For large lists and/or frequent calls to Contains(), prefer using the System.Collections.Generic.HashSet<T> class where calls to Contains() take a constant time (O(0) operation).

This code query is not a code rule, because more often than not, calling O(N) Contains() is not a mistake. This code query aims at pointing out this potential performance pitfall.

Prefer return collection abstraction instead of implementation

This code query matches methods that return a collection implementation, such as List<T> HashSet<T> or Dictionary<TKey,TValue>.

Most often than not, clients of a method don't need to know the exact implementation of the collection returned. It is preferable to return a collection interface such as IList<T>, ICollection<T>, IEnumerable<T> or IDictionary<TKey,TValue>.

Using the collection interface instead of the implementation shouldn't applies to all cases, hence this code query is not code rule.

P/Invokes should be static and not be publicly visible

Methods that are marked with the DllImportAttribute attribute (or methods that are defined by using the Declare keyword in Visual Basic) use Platform Invocation Services to access unmanaged code.

Such methods should not be exposed. By keeping these methods private or internal, you make sure that your library cannot be used to breach security by allowing callers access to unmanaged APIs that they could not call otherwise.

This rule matches methods tagged with DllImportAttribute attribute that are declared as public or declared as non-static.

How to Fix:

To fix a violation of this rule, change the access level of the method and/or declare it as static.

Move P/Invokes to NativeMethods class

Platform Invocation methods, such as those that are marked by using the System.Runtime.InteropServices.DllImportAttribute attribute, or methods that are defined by using the Declare keyword in Visual Basic, access unmanaged code. These methods should be in one of the following classes:

• NativeMethods - This class does not suppress stack walks for unmanaged code permission. (System.Security.SuppressUnmanagedCodeSecurityAttribute must not be applied to this class.) This class is for methods that can be used anywhere because a stack walk will be performed.

• SafeNativeMethods - This class suppresses stack walks for unmanaged code permission. (System.Security.SuppressUnmanagedCodeSecurityAttribute is applied to this class.) This class is for methods that are safe for anyone to call. Callers of these methods are not required to perform a full security review to make sure that the usage is secure because the methods are harmless for any caller.

• UnsafeNativeMethods - This class suppresses stack walks for unmanaged code permission. (System.Security.SuppressUnmanagedCodeSecurityAttribute is applied to this class.) This class is for methods that are potentially dangerous. Any caller of these methods must perform a full security review to make sure that the usage is secure because no stack walk will be performed.

These classes are declared as static internal. The methods in these classes are static and internal.

This rule matches P/Invoke methods not declared in such NativeMethods class.

How to Fix:

To fix a violation of this rule, move the method to the appropriate NativeMethods class. For most applications, moving P/Invokes to a new class that is named NativeMethods is enough.

NativeMethods class should be static and internal

In the description of the default rule Move P/Invokes to NativeMethods class it is explained that NativeMethods classes that host P/Invoke methods, should be declared as static and internal.

This code rule warns about NativeMethods classes that are not declared static and internal.

How to Fix:

Matched NativeMethods classes must be declared as static and internal.

Don't create threads explicitly

This code rule warns about methods that create threads explicitly by creating an instance of the class System.Threading.Thread.

Prefer using the thread pool instead of creating manually your own threads. Threads are costly objects. They take approximately 200,000 cycles to create and about 100,000 cycles to destroy. By default they reserve 1 Mega Bytes of virtual memory for its stack and use 2,000-8,000 cycles for each context switch.

As a consequence, it is preferable to let the thread pool recycle threads.

How to Fix:

Instead of creating explicitly threads, use the Task Parallel Library (TPL) that relies on the CLR thread pool.

Introduction to TPL: https://msdn.microsoft.com/en-us/library/dd460717(v=vs.110).aspx

TPL and the CLR v4 thread pool: http://www.danielmoth.com/Blog/New-And-Improved-CLR-4-Thread-Pool-Engine.aspx

By default issues of this rule have a Critical severity because creating threads can have severe consequences.

Don't use dangerous threading methods

This rule warns about using the methods Abort(), Sleep(), Suspend() or Resume() declared by the Thread class.

• Usage of Thread.Abort() is dangerous. More information on this here: http://www.interact-sw.co.uk/iangblog/2004/11/12/cancellation

• Usage of Thread.Sleep() is a sign of flawed design. More information on this here: http://msmvps.com/blogs/peterritchie/archive/2007/04/26/thread-sleep-is-a-sign-of-a-poorly-designed-program.aspx

• Suspend() and Resume() are dangerous threading methods, marked as obsolete. More information on workaround here: http://stackoverflow.com/questions/382173/what-are-alternative-ways-to-suspend-and-resume-a-thread

How to Fix:

Suppress calls to Thread methods exposed in the suppressCallsTo column in the rule result.

Use instead facilities offered by the Task Parallel Library (TPL) : https://msdn.microsoft.com/en-us/library/dd460717(v=vs.110).aspx

Monitor TryEnter/Exit must be both called within the same method

This rule warns when System.Threading.Monitor Enter() (or TryEnter()) and *Exit() methods are not called within the same method.

Doing so makes the code less readable, because it gets harder to locate when critical sections begin and end.

Also, you expose yourself to complex and error-prone scenarios.

How to Fix:

Refactor matched methods to make sure that Monitor critical sections begin and end within the same method. Basics scenarios can be handled through the C# lock keyword. Using explicitly the class Monitor should be left for advanced situations, that require calls to methods like Wait() and Pulse().

More information on using the Monitor class can be found here: http://www.codeproject.com/Articles/13453/Practical-NET-and-C-Chapter

ReaderWriterLock AcquireLock/ReleaseLock must be both called within the same method

This rule warns when System.Threading.ReaderWriterLock acquire and release, reader or writer locks methods are not called within the same method.

Doing so makes the code less readable, because it gets harder to locate when critical sections begin and end.

Also, you expose yourself to complex and error-prone scenarios.

How to Fix:

Refactor matched methods to make sure that ReaderWriterLock read or write critical sections begin and end within the same method.

Don't tag instance fields with ThreadStaticAttribute

This rule warns when the attribute System.ThreadStaticAttribute is tagging instance fields. As explained in documentation, this attribute is designed to tag only static fields. https://msdn.microsoft.com/en-us/library/system.threadstaticattribute

How to Fix:

Refactor the code to make sure that all fields tagged with ThreadStaticAttribute are static.

Method non-synchronized that read mutable states

Mutable object states are instance fields that can be modified through the lifetime of the object.

Mutable type states are static fields that can be modified through the lifetime of the program.

This query lists methods that read mutable state without synchronizing access. In the case of multi-threaded program, doing so can lead to state corruption.

This code query is not a code rule because more often than not, a match of this query is not an issue.

Method should not return concrete XmlNode

This rule warns about method whose return type is System.Xml.XmlNode or any type derived from XmlNode.

XmlNode implements the interface System.Xml.Xpath.IXPathNavigable. In most situation, returning this interface instead of the concrete type is a better design choice that will abstract client code from implementation details.

How to Fix:

To fix a violation of this rule, change the concrete returned type to the suggested interface IXPathNavigable and refactor clients code if possible.

Types should not extend System.Xml.XmlDocument

This rule warns aboud subclasses of System.Xml.XmlDocument.

Do not create a subclass of XmlDocument if you want to create an XML view of an underlying object model or data source.

How to Fix:

Instead of subclassing XmlDocument, you can use the interface System.Xml.XPath.IXPathNavigable implemented by the class XmlDocument.

An alternative of using XmlDocument, is to use System.Xml.Linq.XDocument, aka LINQ2XML. More information on this can be found here: http://stackoverflow.com/questions/1542073/xdocument-or-xmldocument

Float and Date Parsing must be culture aware

Globalization is the design and development of applications that support localized user interfaces and regional data for users in multiple cultures.

This rule warns about the usage of non-globalized overloads of the methods Parse(), TryParse() and ToString(), of the types DateTime, float, double and decimal. This is the symptom that your application is at least partially not globalized.

Non-globalized overloads of these methods are the overloads that don't take a parameter of type IFormatProvider.

How to Fix:

Globalize your applicaton and make sure to use the globalized overloads of these methods. In the column MethodsCallingMe of this rule result are listed the methods of your application that call the non-globalized overloads.

More information on Creating Globally Aware Applications here: https://msdn.microsoft.com/en-us/library/cc853414(VS.95).aspx

The estimated Debt, which means the effort to fix such issue, is equal to 5 minutes per application method calling at least one non-culture aware method called, plus 3 minutes per non-culture aware method called.

Mark assemblies with assembly version

The identity of an assembly is composed of the following information:

• Assembly name

• Version number

• Culture

• Public key (for strong-named assemblies).

The .NET Framework uses the version number to uniquely identify an assembly, and to bind to types in strong-named assemblies. The version number is used together with version and publisher policy. By default, applications run only with the assembly version with which they were built.

This rule matches assemblies that are not tagged with System.Reflection.AssemblyVersionAttribute.

How to Fix:

To fix a violation of this rule, add a version number to the assembly by using the System.Reflection.AssemblyVersionAttribute attribute.

Assemblies should have the same version

This rule reports application assemblies that have a version different than the version shared by most of application assemblies.

Before fixing these issues, double check if there is a valid reason for dealing with more than one assembly version number. Typically this happens when the analyzed code base is made of assemblies that are not compiled, developed or deployed together.

How to Fix:

If all assemblies of your application should have the same version number, just use the attribute System.Reflection.AssemblyVersion in a source file shared by the assemblies.

Typically this source file is generated by a dedicated MSBuild task like this one http://www.msbuildextensionpack.com/help/4.0.5.0/html/d6c3b5e8-00d4-c826-1a73-3cfe637f3827.htm.

Here you can find interesting assemblies versioning advices. http://stackoverflow.com/a/3905443/27194

By default issues of this rule have a severity set to major since unproper assemblies versioning can lead to complicated deployment problem.

Public methods returning a reference needs a contract to ensure that a non-null reference is returned

Code Contracts are useful to decrease ambiguity between callers and callees. Not ensuring that a reference returned by a method is non-null leaves ambiguity for the caller. This rule matches methods returning an instance of a reference type (class or interface) that doesn't use a Contract.Ensure() method.

Contract.Ensure() is defined in the Microsoft Code Contracts for .NET library, and is typically used to write a code contract on returned reference: Contract.Ensures(Contract.Result<ReturnType>() != null, "returned reference is not null"); https://visualstudiogallery.msdn.microsoft.com/1ec7db13-3363-46c9-851f-1ce455f66970

How to Fix:

Use Microsoft Code Contracts for .NET on the public surface of your API, to remove most ambiguity presented to your client. Most of such ambiguities are about null or not null references.

Don't use null reference if you need to define a method that might not return a result. Use instead the TryXXX() pattern exposed for example in the System.Int32.TryParse() method.

The estimated Debt, which means the effort to fix such issue, is equal to 5 minutes per public application method that might return a null reference plus 3 minutes per method calling such method.

Classes tagged with InitializeOnLoad should have a static constructor

The attribute InitializeOnLoadAttribute is used to initialize an Editor class when Unity loads and when your scripts are recompiled.

The static constructors of the class tagged with this attribute is responsible for the initialization.

How to Fix:

Create a static constructor for the matched classes.

Avoid using non-generic GetComponent

Prefer using the generic version of Component.GetComponent() for type safety.

How to Fix:

Refactor GetComponent(typeof(MyType)) calls in GetComponent<MyType>().

Avoid empty Unity message

Unity messages are called by the runtime even if they don't contain any code.

How to Fix:

Remove matched methods to avoid unnecessary processing.

Avoid using Time.fixedDeltaTime with Update

Update() and FixedUpdate() are dependent on the frame rate. For reading the delta time it is recommended to use Time.deltaTime instead of Time.fixedDeltaTime because it automatically returns the right delta time if you are inside these functions.

How to Fix:

Refactor calls to Time.fixedDeltaTime with Time.deltaTime within Update() and FixedUpdate() functions

Use CreateInstance to create a scriptable object

If Foo is a type that derives from UnityEngine.ScriptableObject the method ScriptableObject.CreateInstance<T>() must be used to create an instance of Foo.

This is because the Unity egine needs to create the scriptable object itself to handle Unity message methods.

How to Fix:

Replace new Foo() expressions with ScriptableObject.CreateInstance<Foo>() expressions.

The SerializeField attribute is redundant on public fields

The SerializeField attribute makes a field display in the Inspector and causes it to be saved.

Declaring a field as public makes a field display in the Inspector and causes it to be saved, as well as letting the field be publicly accessed by other scripts.

Hence the SerializeField attribute is redundant for public fields.

How to Fix:

Remove the SerializeField attribute on matched public fields.

InitializeOnLoadMethod should tag only static and parameterless methods

The attribute InitializeOnLoadMethodAttribute allows an editor static method to be initialized when Unity loads without action from the user.

The attribute RuntimeInitializeOnLoadMethodAttribute has same behavior except that the methods are invoked after the game has been loaded.

Both attributes can only tag static and parameterless methods.

How to Fix:

Make the matched methods static and parameterless.

Prefer using SetPixels32() over SetPixels()

The structure Color uses floating point values within the range [0.0,1.0] to represent each color component.

The structure Color32 uses a byte value within the range [0,255] to represent each color component.

Hence Color32 consumes 4 times less memory and is much faster to work with.

How to Fix:

If 32bit-RGBA is compatible with your scenario, use SetPixels32() instead.

Don't use System.Reflection in performance critical messages

System.Reflection is a slow API.

Don't use it in performance critical messages like Update, FixedUpdate, LateUpdate, or OnGUI.

How to Fix:

Don't use reflection in matched methods.

Discard generated Assemblies from JustMyCode

This code query is prefixed with notmycode. This means that all application assemblies matched by this code query are removed from the code base view JustMyCode.Assemblies. It also means that all namespaces, types, methods and fields contained in a matched assembly are removed from the code base view JustMyCode. The code base view JustMyCode is used by most default code queries and rules.

So far this query only matches application assemblies tagged with System.CodeDom.Compiler.GeneratedCodeAttribute and also ASP.NET Core Razor assemblies suffixed with .Views.dll. Make sure to make this query richer to discard your generated assemblies from the NDepend rules results.

notmycode queries are executed before running others queries and rules. Also modifying a notmycode query provokes re-run of queries and rules that rely on the JustMyCode code base view.

Several notmycode queries can be written to match assemblies, in which case this results in cumulative effect.

Online documentation: https://www.ndepend.com/docs/cqlinq-syntax#NotMyCode

Discard generated Namespaces from JustMyCode

This code query is prefixed with notmycode. This means that all application namespaces matched by this code query are removed from the code base view JustMyCode.Namespaces. It also means that all types, methods and fields contained in a matched namespace are removed from the code base view JustMyCode. The code base view JustMyCode is used by most default code queries and rules.

So far this query matches the My namespaces generated by the VB.NET compiler. This query also matches namespaces named mshtml or Microsoft.Office.* that are generated by tools.

notmycode queries are executed before running others queries and rules. Also modifying a notmycode query provokes re-run of queries and rules that rely on the JustMyCode code base view.

Several notmycode queries can be written to match namespaces, in which case this results in cumulative effect.

Online documentation: https://www.ndepend.com/docs/cqlinq-syntax#NotMyCode

Discard generated Types from JustMyCode

This code query is prefixed with notmycode. This means that all application types matched by this code query are removed from the code base view JustMyCode.Types. It also means that all methods and fields contained in a matched type are removed from the code base view JustMyCode. The code base view JustMyCode is used by most default code queries and rules.

So far this query matches several well-identified generated types, like the ones tagged with System.CodeDom.Compiler.GeneratedCodeAttribute. Make sure to make this query richer to discard your generated types from the NDepend rules results.

notmycode queries are executed before running others queries and rules. Also modifying a notmycode query provokes re-run of queries and rules that rely on the JustMyCode code base view.

Several notmycode queries can be written to match types, in which case this results in cumulative effect.

Online documentation: https://www.ndepend.com/docs/cqlinq-syntax#NotMyCode

Discard generated and designer Methods from JustMyCode

This code query is prefixed with notmycode. This means that all application methods matched by this code query are removed from the code base view JustMyCode.Methods. The code base view JustMyCode is used by most default code queries and rules.

So far this query matches several well-identified generated methods, like the ones tagged with System.CodeDom.Compiler.GeneratedCodeAttribute, or the ones declared in a source file suffixed with .designer.cs. Make sure to make this query richer to discard your generated methods from the NDepend rules results.

notmycode queries are executed before running others queries and rules. Also modifying a notmycode query provokes re-run of queries and rules that rely on the JustMyCode code base view.

Several notmycode queries can be written to match methods, in which case this results in cumulative effect.

Online documentation: https://www.ndepend.com/docs/cqlinq-syntax#NotMyCode

Discard generated Fields from JustMyCode

This code query is prefixed with notmycode. This means that all application fields matched by this code query are removed from the code base view JustMyCode.Fields. The code base view JustMyCode is used by most default code queries and rules.

This query matches application fields tagged with System.CodeDom.Compiler.GeneratedCodeAttribute, and Windows Form, WPF and UWP fields generated by the designer. Make sure to make this query richer to discard your generated fields from the NDepend rules results.

notmycode queries are executed before running others queries and rules. Also modifying a notmycode query provokes re-run of queries and rules that rely on the JustMyCode code base view.

Several notmycode queries can be written to match fields, in which case this results in cumulative effect.

Online documentation: https://www.ndepend.com/docs/cqlinq-syntax#NotMyCode

JustMyCode code elements

This code query enumerates all assemblies, namespaces, types, methods and fields in your application, that are considered as being your code.

This means concretely that the ICodeBaseView JustMyCode only shows these code elements. This code base view is used by many default code rule to avoid being warned on code elements that you don't consider as your code - typically the code elements generated by a tool.

These code elements are the ones that are not matched by any quere prefixed with notmycode.

NotMyCode code elements

This code query enumerates all assemblies, namespaces, types, methods and fields in your application, that are considered as not being your code.

This means concretely that the ICodeBaseView JustMyCode hide these code elements. This code base view is used by many default code rules to avoid being warned on code elements that you don't consider as your code - typically the code elements generated by a tool.

These code elements are the ones matched by queries prefixed with notmycode.

# New Issues since Baseline

# Issues Fixed since Baseline

# Issues Worsened since Baseline

An issue is considered worsened if its debt increased since the baseline.

Debt documentation: https://www.ndepend.com/docs/technical-debt#Debt

# Issues with severity Blocker

An issue with the severity Blocker cannot move to production, it must be fixed.

The severity of an issue is inferred from the issue annual interest and thresholds defined in the NDepend Project Properties > Issue and Debt.

# Issues with severity Critical

An issue with a severity level Critical shouldn't move to production. It still can for business imperative needs purposes, but at worth it must be fixed during the next iterations.

The severity of an issue is inferred from the issue annual interest and thresholds defined in the NDepend Project Properties > Issue and Debt.

# Issues with severity High

An issue with a severity level High should be fixed quickly, but can wait until the next scheduled interval.

The severity of an issue is inferred from the issue annual interest and thresholds defined in the NDepend Project Properties > issue and Debt.

# Issues with severity Medium

An issue with a severity level Medium is a warning that if not fixed, won't have a significant impact on development.

The severity of an issue is inferred from the issue annual interest and thresholds defined in the NDepend Project Properties > issue and Debt.

# Issues with severity Low

The severity level Low is used by issues that have a zero, or close to zero, value for Annual Interest.

Issues with a Low or Medium severity level represents small improvements, ways to make the code looks more elegant.

The Broken Window Theory https://en.wikipedia.org/wiki/Broken_windows_theory states that:

"Consider a building with a few broken windows. If the windows are not repaired, the tendency is for vandals to break a few more windows. Eventually, they may even break into the building, and if it's unoccupied, perhaps become squatters or light fires inside."

Issues with a Low or Medium severity level represents the broken windows of a code base. If they are not fixed, the tendency is for developers to not care for living in an elegant code, which will result in extra-maintenance-cost in the long term.

The severity of an issue is inferred from the issue annual interest and thresholds defined in the NDepend Project Properties > issue and Debt.

# Blocker/Critical/High Issues

The number of issues with a severity Blocker, Critical or High.

An issue with the severity Blocker cannot move to production, it must be fixed.

An issue with a severity level Critical shouldn't move to production. It still can for business imperative needs purposes, but at worth it must be fixed during the next iterations.

An issue with a severity level High should be fixed quickly, but can wait until the next scheduled interval.

# Issues

The number of issues no matter the issue severity.

# Suppressed Issues

The number of issues suppressed with the usage of SuppressMessage. See the suppressed issues documentation here: https://www.ndepend.com/docs/suppress-issues

# Rules

This trend metric counts the number of active rules. This count includes violated and not violated rules. This count includes critical and non critical rules.

When no baseline is available, rules that rely on diff are not counted. If you observe that this count slightly decreases with no apparent reason, the reason is certainly that rules that rely on diff are not counted because the baseline is not defined.

# Rules Violated

This trend metric counts the number of active rules that are violated. This count includes critical and non critical rules.

When no baseline is available, rules that rely on diff are not counted. If you observe that this count slightly decreases with no apparent reason, the reason is certainly that rules that rely on diff are not counted because the baseline is not defined.

# Critical Rules Violated

This trend metric counts the number of critical active rules that are violated.

The concept of critical rule is useful to pinpoint certain rules that should not be violated.

When no baseline is available, rules that rely on diff are not counted. If you observe that this count slightly decreases with no apparent reason, the reason is certainly that rules that rely on diff are not counted because the baseline is not defined.

# Quality Gates

This trend metric counts the number of active quality gates, no matter the gate status (Pass, Warn, Fail).

When no baseline is available, quality gates that rely on diff are not counted. If you observe that this count slightly decreases with no apparent reason, the reason is certainly that quality gates that rely on diff are not counted because the baseline is not defined.

# Quality Gates Warn

This trend metric counts the number of active quality gates that warns.

When no baseline is available, quality gates that rely on diff are not counted. If you observe that this count slightly decreases with no apparent reason, the reason is certainly that quality gates that rely on diff are not counted because the baseline is not defined.

# Quality Gates Fail

This trend metric counts the number of active quality gates that fails.

When no baseline is available, quality gates that rely on diff are not counted. If you observe that this count slightly decreases with no apparent reason, the reason is certainly that quality gates that rely on diff are not counted because the baseline is not defined.

Percentage Debt (Metric)

This Trend Metric name is suffixed with (Metric) to avoid query name collision with the Quality Gate with same name.

Infer a percentage from:

• the estimated total time to develop the code base

• and the the estimated total time to fix all issues (the Debt).

Estimated total time to develop the code base is inferred from # lines of code of the code base and from the Estimated number of man-day to develop 1000 logical lines of code setting found in NDepend Project Properties > Issue and Debt.

Debt documentation: https://www.ndepend.com/docs/technical-debt#Debt

Debt (Metric)

This Trend Metric name is suffixed with (Metric) to avoid query name collision with the Quality Gate with same name.

Debt documentation: https://www.ndepend.com/docs/technical-debt#Debt

New Debt since Baseline (Metric)

This Trend Metric name is suffixed with (Metric) to avoid query name collision with the Quality Gate with same name.

Debt added (or fixed if negative) since baseline.

Debt documentation: https://www.ndepend.com/docs/technical-debt#Debt

Annual Interest (Metric)

This Trend Metric name is suffixed with (Metric) to avoid query name collision with the Quality Gate with same name.

Annual Interest documentation: https://www.ndepend.com/docs/technical-debt#AnnualInterest

New Annual Interest since Baseline (Metric)

This Trend Metric name is suffixed with (Metric) to avoid query name collision with the Quality Gate with same name.

Annual Interest added (or fixed if negative) since baseline.

Annual Interest documentation: https://www.ndepend.com/docs/technical-debt#AnnualInterest

Breaking Point

The breaking point of a set of issues is the debt divided by the annual interest.

The debt is the estimated cost-to-fix the issues.

The annual interest is the estimated cost-to-not-fix the issues, per year.

Hence the breaking point is the point in time from now, when not fixing the issues cost as much as fixing the issue.

Breaking Point documentation: https://www.ndepend.com/docs/technical-debt#BreakingPoint

Breaking Point of Blocker / Critical / High Issues

# Lines of Code

# Lines of Code (JustMyCode)

# Lines of Code (NotMyCode)

# Lines of Code Added since the Baseline

# Source Files

This trend metric counts the number of source files.

If a value 0 is obtained, it means that at analysis time, assemblies PDB files were not available. https://www.ndepend.com/docs/ndepend-analysis-inputs-explanation

So far source files cannot be matched by a code query. However editing the query "Application Types" and then Group by source file declarations will list source files with types source declarations.

# IL Instructions

# IL Instructions (NotMyCode)

# Lines of Comments

This trend metric returns the number of lines of comment counted in application source files.

So far commenting information is only extracted from C# source code and VB.NET support is planned.

Percentage of Comments

This trend metric returns the percentage of comment compared to the number of logicallines of code.

So far commenting information is only extracted from C# source code and VB.NET support is planned.

# Assemblies

This trend metric query counts all application assemblies. For each assembly it shows the estimated all technical-debt and all issues. All means debt and issues of the assembly and of its child namespaces, types and members.

# Namespaces

This trend metric query counts all application namespaces. For each namespace it shows the estimated all technical-debt and all issues. All means debt and issues of the namespace and of its child types and members.

# Types

This trend metric query counts all application types non-generated by compiler. For each type it shows the estimated all technical-debt and all issues. All means debt and issues of the type and of its child members.

# Public Types

# Classes

# Abstract Classes

# Interfaces

# Structures

# Methods

This trend metric query counts all application methods non-generated by compiler. For each method it shows the estimated technical-debt and the issues.

# Abstract Methods

# Concrete Methods

# Fields

This trend metric query counts all application fields non-generated by compiler that are not enumeration values nor constant values. For each field it shows the estimated technical-debt and the issues.

Max # Lines of Code for Methods (JustMyCode)

Average # Lines of Code for Methods

Average # Lines of Code for Methods with at least 3 Lines of Code

Max # Lines of Code for Types (JustMyCode)

Average # Lines of Code for Types

Max Cyclomatic Complexity for Methods

Average Cyclomatic Complexity for Methods

Max IL Cyclomatic Complexity for Methods

Average IL Cyclomatic Complexity for Methods

Max IL Nesting Depth for Methods

Average IL Nesting Depth for Methods

Max # of Methods for Types

Average # Methods for Types

Max # of Methods for Interfaces

Average # Methods for Interfaces

Percentage Code Coverage

# Lines of Code Covered

# Lines of Code Not Covered

# Lines of Code Uncoverable

This code query returns the number of lines of code Uncoverable. This represents the sum of lines of code in both methods whose coverage data is not available in code coverage file imported and methods explicitly excluded from code coverage.

A method, type or assembly can be excluded from coverage either by using a .runsettings file, or by using an Uncoverable attribute.

A .runsettings file can be specified through: NDepend Project Properties > Analysis > Code Coverage > Settings > Exclusion Coverage File

Typically the attribute System.Diagnostics.CodeAnalysis.ExcludeFromCodeCoverageAttribute is used as the Uncoverable attribute.

An additional custom Uncoverable attribute can be defined in the: NDepend Project Properties > Analysis > Code Coverage > Settings > Un-Coverable attributes.

If coverage is imported from VS coverage technologies those attributes are also considered as Uncoverable attribute: System.Diagnostics.DebuggerNonUserCodeAttribute System.Diagnostics.DebuggerHiddenAttribute.

If coverage data imported at analysis time is not in-sync with the analyzed code base, this query will also list methods not defined in the coverage data imported.

# Lines of Code in Types 100% Covered

A line of code covered by tests is even more valuable if it is in a type 100% covered by test.

Covering 90% of a class is not enough.

• It means that this 10% uncovered code is hard-to-test,

• which means that this code is not well-designed,

• which means that it is error-prone.

Better test error-prone code, isn't it?

# Lines of Code in Methods 100% Covered

The same remark than in the Trend Metric # Lines of Code in Types 100% Covered applies for method 100% covered.

A line of code covered by tests is even more valuable if it is in a method 100% covered by test.

Max C.R.A.P Score

Change Risk Analyzer and Predictor (i.e. CRAP) is a code metric that helps in pinpointing overly complex and untested code. Is has been first defined here: http://www.artima.com/weblogs/viewpost.jsp?thread=215899

The Formula is: CRAP(m) = CC(m)^2 * (1 – cov(m)/100)^3 + CC(m)

• where CC(m) is the cyclomatic complexity of the method m

• and cov(m) is the percentage coverage by tests of the method m

Matched methods cumulates two highly error prone code smells:

• A complex method, difficult to develop and maintain.

• Non 100% covered code, difficult to refactor without any regression bug.

The higher the CRAP score, the more painful to maintain and error prone is the method.

An arbitrary threshold of 30 is fixed for this code rule as suggested by inventors.

Notice that no amount of testing will keep methods with a Cyclomatic Complexity higher than 30, out of CRAP territory.

Notice that CRAP score is not computed for too short methods with less than 10 lines of code.

To list methods with higher C.R.A.P scores, please refer to the default rule: Test and Code Coverage > C.R.A.P method code metric

Average C.R.A.P Score

Percentage JustMyCode Coverage

# Lines of JustMyCode Covered

# Lines of JustMyCode Not Covered

# Third-Party Assemblies Used

# Third-Party Namespaces Used

# Third-Party Types Used

# Third-Party Methods Used

# Third-Party Fields Used

# Third-Party Code Elements Used

New assemblies

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists assemblies that have been added since the baseline.

Assemblies removed

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists assemblies that have been removed since the baseline.

Assemblies where code was changed

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists assemblies in which, code has been changed since the baseline.

New namespaces

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists namespaces that have been added since the baseline.

Namespaces removed

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists namespaces that have been removed since the baseline.

Namespaces where code was changed

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists namespaces in which, code has been changed since the baseline.

New types

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists types that have been added since the baseline.

Types removed

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists types that have been removed since the baseline.

Types where code was changed

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists types in which, code has been changed since the baseline.

To visualize changes in code, right-click a matched type and select:

• Compare older and newer versions of source file

• Compare older and newer versions decompiled with Reflector

Heuristic to find types moved from one namespace or assembly to another

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists types moved from one namespace or assembly to another. The heuristic implemented consists in making a join LINQ query on type name (without namespace prefix), applied to the two sets of types added and types removed.

Types directly using one or several types changed

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists types unchanged since the baseline but that use directly some types where code has been changed since the baseline.

For such matched type, the code hasen't been changed, but still the overall behavior might have been changed.

The query result includes types changed directly used,

Types indirectly using one or several types changed

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists types unchanged since the baseline but that use directly or indirectly some types where code has been changed since the baseline.

For such matched type, the code hasen't been changed, but still the overall behavior might have been changed.

The query result includes types changed directly used, and the depth of usage of types indirectly used, depth of usage as defined in the documentation of DepthOfIsUsingAny() NDepend API method: https://www.ndepend.com/api/webframe.html#NDepend.API~NDepend.CodeModel.ExtensionMethodsSequenceUsage~DepthOfIsUsingAny.html

New methods

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists methods that have been added since the baseline.

Methods removed

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists methods that have been removed since the baseline.

Methods where code was changed

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists methods in which, code has been changed since the baseline.

To visualize changes in code, right-click a matched method and select:

• Compare older and newer versions of source file

• Compare older and newer versions decompiled with Reflector

Methods directly calling one or several methods changed

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists methods unchanged since the baseline but that call directly some methods where code has been changed since the baseline.

For such matched method, the code hasen't been changed, but still the overall behavior might have been changed.

The query result includes methods changed directly used,

Methods indirectly calling one or several methods changed

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists methods unchanged since the baseline but that use directly or indirectly some methods where code has been changed since the baseline.

For such matched method, the code hasen't been changed, but still the overall behavior might have been changed.

The query result includes methods changed directly used, and the depth of usage of methods indirectly used, depth of usage as defined in the documentation of DepthOfIsUsingAny() NDepend API method: https://www.ndepend.com/api/webframe.html#NDepend.API~NDepend.CodeModel.ExtensionMethodsSequenceUsage~DepthOfIsUsingAny.html

New fields

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists fields that have been added since the baseline.

Fields removed

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists fields that have been removed since the baseline.

Third party types that were not used and that are now used

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists types defined in third-party assemblies, that were not used at baseline time, and that are now used.

Third party types that were used and that are not used anymore

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists types defined in third-party assemblies, that were used at baseline time, and that are not used anymore.

Third party methods that were not used and that are now used

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists methods defined in third-party assemblies, that were not used at baseline time, and that are now used.

Third party methods that were used and that are not used anymore

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists methods defined in third-party assemblies, that were used at baseline time, and that are not used anymore.

Third party fields that were not used and that are now used

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists fields defined in third-party assemblies, that were not used at baseline time, and that are now used.

Third party fields that were used and that are not used anymore

This query is executed only if a baseline for comparison is defined (diff mode).

This code query lists fields defined in third-party assemblies, that were used at baseline time, and that are not used anymore.

Most used types (Rank)

TypeRank values are computed by applying the Google PageRank algorithm on the graph of types' dependencies. Types with high Rank are the most used ones. Not necessarily the ones with the most users types, but the ones used by many types, themselves having a lot of types users.

See the definition of the TypeRank metric here: https://www.ndepend.com/docs/code-metrics#TypeRank

This code query lists the 100 application types with the higher rank.

The main consequence of being used a lot for a type is that each change (both syntax change and behavior change) will result in potentially a lot of pain since most types clients will be impacted.

Hence it is preferable that types with higher TypeRank, are interfaces, that are typically less subject changes.

Also interfaces avoid clients relying on implementations details. Hence, when the behavior of classes implementing an interface changes, this shouldn't impact clients of the interface. This is in essence the Liskov Substitution Principle. http://en.wikipedia.org/wiki/Liskov_substitution_principle

Most used methods (Rank)

MethodRank values are computed by applying the Google PageRank algorithm on the graph of methods' dependencies. Methods with high Rank are the most used ones. Not necessarily the ones with the most callers methods, but the ones called by many methods, themselves having a lot of callers.

See the definition of the MethodRank metric here: https://www.ndepend.com/docs/code-metrics#MethodRank

This code query lists the 100 application methods with the higher rank.

The main consequence of being used a lot for a method is that each change (both signature change and behavior change) will result in potentially a lot of pain since most methods callers will be impacted.

Hence it is preferable that methods with highest MethodRank, are abstract methods, that are typically less subject to signature changes.

Also abstract methods avoid callers relying on implementations details. Hence, when the code of a method implementing an abstract method changes, this shouldn't impact callers of the abstract method. This is in essence the Liskov Substitution Principle. http://en.wikipedia.org/wiki/Liskov_substitution_principle

Most used assemblies (#AssembliesUsingMe)

This code query lists the 100 application and third-party assemblies, with the higher number of assemblies users.

Most used namespaces (#NamespacesUsingMe )

This code query lists the 100 application and third-party namespaces, with the higher number of namespaces users.

Most used types (#TypesUsingMe )

This code query lists the 100 application and third-party types, with the higher number of types users.

Most used methods (#MethodsCallingMe )

This code query lists the 100 application and third-party methods, with the higher number of methods callers.

Namespaces that use many other namespaces (#NamespacesUsed )

This code query lists the 100 application namespaces with the higher number of namespaces used.

Types that use many other types (#TypesUsed )

This code query lists the 100 application types with the higher number of types used.

Methods that use many other methods (#MethodsCalled )

This code query lists the 100 application methods with the higher number of methods called.

High-level to low-level assemblies (Level)

This code query lists assemblies ordered by Level values. See the definition of the AssemblyLevel metric here: https://www.ndepend.com/docs/code-metrics#Level

High-level to low-level namespaces (Level)

This code query lists namespaces ordered by Level values. See the definition of the NamespaceLevel metric here: https://www.ndepend.com/docs/code-metrics#Level

High-level to low-level types (Level)

This code query lists types ordered by Level values. See the definition of the TypeLevel metric here: https://www.ndepend.com/docs/code-metrics#Level

High-level to low-level methods (Level)

This code query lists methods ordered by Level values. See the definition of the MethodLevel metric here: https://www.ndepend.com/docs/code-metrics#Level

Check that the assembly Asm1 is not using the assembly Asm2

This rule is a sample rule that can be adapted to your need.

It shows how to be warned if a particular assembly is using another particular assembly.

Such rule can be generated for assemblies A and B:

• by right clicking the cell in the Dependency Matrix with B in row and A in column,

• or by right-clicking the concerned arrow in the Dependency Graph from A to B,

and in both cases, click the menu Generate a code rule that warns if this dependency exists

The generated rule will look like this one. It is now up to you to adapt this rule to check exactly your needs.

How to Fix:

This is a sample rule there is nothing to fix as is.

Check that the namespace N1.N2 is not using the namespace N3.N4.N5

This rule is a sample rule that can be adapted to your need.

It shows how to be warned if a particular namespace is using another particular namespace.

Such rule can be generated for namespaces A and B:

• by right clicking the cell in the Dependency Matrix with B in row and A in column,

• or by right-clicking the concerned arrow in the Dependency Graph from A to B,

and in both cases, click the menu Generate a code rule that warns if this dependency exists

The generated rule will look like this one. It is now up to you to adapt this rule to check exactly your needs.

How to Fix:

This is a sample rule there is nothing to fix as is.

Check that the assembly Asm1 is only using the assemblies Asm2, Asm3 or mscorlib

This rule is a sample rule that can be adapted to your need.

It shows how to enforce that a particular assembly is only using a particular set of assemblies.

How to Fix:

This is a sample rule there is nothing to fix as is.

Check that the namespace N1.N2 is only using the namespaces N3.N4, N5 or System

This rule is a sample rule that can be adapted to your need.

It shows how to enforce that a particular namespace is only using a particular set of namespaces.

How to Fix:

This is a sample rule there is nothing to fix as is.

Check that AsmDrawing is the only assembly that is using System.Drawing

This rule is a sample rule that can be adapted to your need.

It shows how to enforce that a particular assembly is only used by another particular assembly.

How to Fix:

This is a sample rule there is nothing to fix as is.

Check that only 3 assemblies are using System.Drawing

This rule is a sample rule that can be adapted to your need.

It shows how to enforce that a particular assembly is only used by 3 any others assemblies.

How to Fix:

This is a sample rule there is nothing to fix as is.

Check that all methods that call Foo.Fct1() also call Foo.Fct2(Int32)

This rule is a sample rule that can be adapted to your need.

It shows how to enforce that if a method calls a particular method, it must call another particular method.

How to Fix:

This is a sample rule there is nothing to fix as is.

Check that all types that derive from Foo, also implement IFoo

This rule is a sample rule that can be adapted to your need.

It shows how to enforce that all classes that derive from a particular base class, also implement a particular interface.

How to Fix:

This is a sample rule there is nothing to fix as is.

Check that all types that has the attribute FooAttribute are declared in the namespace N1.N2*

This rule is a sample rule that can be adapted to your need.

It shows how to enforce that all types that are tagged with a particular attribute, are declared in a particular namespace.

How to Fix:

This is a sample rule there is nothing to fix as is.

Check that all synchronization objects are only used from the namespaces under MyNamespace.Sync

This rule is a sample rule that can be adapted to your need.

It shows how to enforce that all synchronization objects are used from a particular namespace.

How to Fix:

This is a sample rule there is nothing to fix as is.

Check that the namespace N1.N2 is 100% covered by tests

This is a sample rule that shows how to check if a particular namespace is 100% covered by tests. Both the string @"N1.N2" and the threshold 100 can be adapted to your own needs.

To execute this sample rule, coverage data must be imported. More info here: https://www.ndepend.com/docs/code-coverage

How to Fix:

This is a sample rule there is nothing to fix as is.

Check that the assembly Asm is 100% covered by tests

This is a sample rule that shows how to check if a particular assembly is 100% covered by tests. Both the string @"Asm" and the threshold 100 can be adapted to your own needs.

To execute this sample rule, coverage data must be imported. More info here: https://www.ndepend.com/docs/code-coverage

How to Fix:

This is a sample rule there is nothing to fix as is.

Check that the class Namespace.Foo is 100% covered by tests

This is a sample rule that shows how to check if a particular class is 100% covered by tests. Both the string @"Namespace.Foo" and the threshold 100 can be adapted to your own needs.

To execute this sample rule, coverage data must be imported. More info here: https://www.ndepend.com/docs/code-coverage

How to Fix:

This is a sample rule there is nothing to fix as is.

Check that the class Namespace.Foo.Method(Int32) is 100% covered by tests

This is a sample rule that shows how to check if a particular method is 100% covered by tests. Both the string @"Namespace.Foo.Method(Int32)" and the threshold 100 can be adapted to your own needs.

To execute this sample rule, coverage data must be imported. More info here: https://www.ndepend.com/docs/code-coverage

How to Fix:

This is a sample rule there is nothing to fix as is.

Check that all types that derive from Foo, has a name that ends up with Foo

This rule is a sample rule that can be adapted to your need.

It shows how to enforce that all classes that derive from a particular class, are named with a particular suffix.

How to Fix:

This is a sample rule there is nothing to fix as is.

Check that all namespaces begins with CompanyName.ProductName

A practice widely adopted is that, in a product source code, all namespaces start with "CompanyName.ProductName".

This rule must be adapted with your own "CompanyName.ProductName".

How to Fix:

Update all namespaces definitions in source code to satisfy this rule.

Description
CQLinq Source Code